Ask a question

Radium in well water: the 5 pCi/L limit and how to treat it

4 min readBy Updated Sources checked3 sources
Hand holding a clear glass of drinking water
Photo: Unsplash
Short answerRadium in well water is a natural radioactive element, and EPA's limit for radium-226 plus radium-228 is 5 pCi/L for public systems. You cannot taste or see it, so you need a lab test. If it is high, a cation exchange softener or reverse osmosis can reduce it, but waste handling needs care.

Key facts

What radium is and where it comes from

Radium forms when uranium and thorium in rock break down over geologic time. It dissolves into groundwater in some aquifers, especially those with low oxygen or high mineral content. It is a natural source, so it is not caused by anything a homeowner did.

It has no taste, smell or color. Wells in the same area can differ, but where radium is known to be present, state agencies often advise testing all private wells.

The federal number

Radioactivity limits for drinking water
ContaminantMCL
Radium-226 + radium-228 (combined)5 pCi/L
Gross alpha15 pCi/L
Uranium30 µg/L

These limits apply to public water systems, not private wells. Use them as benchmarks. A gross alpha test is often a first screening that can point to radium or uranium. Ask the lab for radium by name if your gross alpha is high, or if neighbors have had radium results.

Health effects

Radium is radioactive, and EPA sets its limit to reduce the cancer risk that comes with long-term exposure. The effects come from drinking the water for years, not from a single glass or from skin contact. If your result is above 5 pCi/L, switch to another source for drinking and cooking while you set up treatment, and ask your health department for advice for your home.

How to test

Use a state-certified lab, and ask whether it is certified for radiochemistry. Radium tests take longer than routine tests and can cost more. Ask for combined radium-226 and radium-228, and consider gross alpha and uranium at the same time.

Ask for combined radium-226 and radium-228, and for gross alpha. Radiochemistry sample bottles are often larger and may be acidified, so follow the fill line and do not rinse. Expect a longer wait than for routine tests. If your gross alpha is above 15 pCi/L, the lab or your health department can tell you which follow-up tests to order.

Treatment options

Radium removal methods
MethodNotes
Cation exchange (water softener)Removes radium along with hardness; the resin and waste brine become radioactive over time
Reverse osmosisRemoves radium at one tap; waste water goes to a drain
Other media (barium sulfate or specialty adsorbers)Used in some systems; ask a pro for local advice
Boiling or sediment filterDoes not remove radium

A softener is a common fix when the water is also hard, since it removes both. The catch is waste. Used resin and brine from a softener working on radium may need special handling, so ask your health department or state radiation program about disposal before installing.

SafetyDo not pour waste from a radium treatment system into a septic system or a stream without checking with your state agency first.

What to do right now

  1. TestOrder radium, gross alpha and uranium from a certified lab.
  2. Switch sources if highUse bottled water for drinking and cooking.
  3. Ask about wasteCheck disposal rules before choosing treatment.
  4. Install and retestTest treated water after the system is running.

Common mistakes

  • Assuming a hardness-only softener test covers radium
  • Putting radioactive brine into a septic system without advice
  • Skipping a retest after the softener is installed
  • Letting salt run out so the softener stops working

Questions to ask a treatment dealer

  • Is the system certified to remove radium, and what is the expected result in my water?
  • How often does the resin regenerate, and how much waste does it produce?
  • Where does the waste go, and does my state have rules about it?
  • Does hardness, iron or manganese in my water change how the resin works?
  • What do I do when the resin is spent?

Iron and manganese can foul softener resin, so the system may need pretreatment. A full lab report with those numbers helps the dealer avoid a system that stops working in a year.

Why radium and hardness often show up together

Radium behaves chemically like calcium and barium, so it often travels with hard water in some aquifers. That is why a softener can remove it. It also means a hardness result in the high range, in an area with known radium, is a good reason to run the radiochemistry tests.

Ask your state health department or geological survey whether radium is known in your aquifer. They may have maps or advice about which labs run the tests.

Reading your radium result

Radium results and actions
ResultMeaningAction
Below 5 pCi/L combinedUnder the federal limitRetest every few years
At or above 5 pCi/LAt or over the federal limitSwitch drinking water; plan treatment
Gross alpha above 15 pCi/LOver the gross alpha limitAsk for radium and uranium tests

The limit is for the sum of radium-226 and radium-228, so make sure the lab reports both and adds them.

Disposal and household use during treatment

A softener or resin bed that is removing radium slowly collects it, so the resin, the brine and any sludge in the brine tank may need special handling. Ask your state radiation or drinking water program what is allowed in your state before you install, and keep notes on when the resin is replaced.

While you wait for treatment, use another source for drinking, cooking and baby formula. Laundry, dishes and bathing are not the main route of exposure to radium in water.

Questions people ask

Does a water softener remove radium?

Yes, cation exchange softeners can remove radium along with hardness, but the resin and waste need careful handling.

What is the radium limit for drinking water?

EPA's limit for combined radium-226 and radium-228 is 5 pCi/L for public systems.

What is a gross alpha test?

It is a screening test for alpha radiation from several elements. EPA's limit is 15 pCi/L. A high result needs follow-up tests for radium and uranium.

Is radium in well water natural?

Yes. It comes from the natural breakdown of uranium and thorium in rock.

Sources

This page explains general practice for US private wells. Check your state's rules on the state pages, use a certified lab for testing, and hire a licensed well contractor for electrical or well work. See our editorial policy.

Still not sure what to do?

Ask us about your situation. A real person reads every question.

This field is required.
We reply by email. We never share it without your permission.Enter an email address like name@example.com.
Describe what you are seeing and anything you have tried. Plain words are fine.Please write at least 20 characters so we can help.
Choose your state so we can point you to the right rules.
Prefer the full form?

Thanks, we have your question.

We read every message and reply by email, usually within a few working days. If it is urgent (sickness, a positive E. coli test, or a flooded well), use bottled water and call your county or state health department now.

Find your state's well program

Keep reading

Related guides

All 35 contaminants guides