Ask a question

Radon in well water: how much of a risk it is

4 min readBy Updated Sources checked3 sources
Hand holding a clear glass of drinking water
Photo: Unsplash
Short answerRadon in well water is a natural radioactive gas, and EPA has no final federal standard for it in drinking water. The main risk is breathing the gas as it escapes during showers, laundry and dishwashing, which can add to radon in indoor air. Test your indoor air first, then test the water if air levels are high.

Key facts

  • EPA has no final federal standard for radon in drinking water.EPA: Radon
  • Radon is mainly an air risk when it escapes from water during showers and other uses.EPA: Radon
  • Private wells are not regulated by EPA, so owners are responsible for testing.EPA: Private Drinking Water Wells

What radon in water is

Radon is a radioactive gas that forms when uranium in rock breaks down. It can dissolve into groundwater and travel to your well. It has no color, smell or taste. Wells drilled into bedrock are more likely to have it than shallow wells in loose soil.

Most radon in a house comes from soil gas that seeps through the foundation, not from water. Water adds some radon to the air when it is used, especially in showers, but this is usually a smaller share.

What EPA says

EPA has no final federal drinking water standard for radon. Its radon pages explain that the main risk from radon in water is breathing the gas that is released when you use water, and a smaller risk is from drinking it. Radon in indoor air is linked to lung cancer. Because of this, EPA's advice starts with testing the air in your home.

Which test comes first
QuestionStart here
Do I have radon in my home air?Test the air with a home kit or a professional
Is radon in my water?Test the water with a certified lab
Air is high and I have a wellTest water too; fix air first, then water if it adds significantly

How to test the water

Use a state-certified lab and ask how to collect the sample. Radon escapes from water quickly, so the sample must be taken without letting air in or out, and shipped fast. Many labs send a special vial. Your state radon office can also help with labs and local advice.

Ask the lab for its radon-in-water kit, which usually has a sealed vial that you fill without bubbles, from a cold tap run for a few minutes, and ship quickly. Do not use a tap after a softener or aerator. Indoor air needs a separate short-term or long-term radon kit.

Treatment options

  • Aeration: sprays or bubbles air through the water and vents the gas outside. It is the most effective method for removing radon from water.
  • Granular activated carbon (GAC): can remove radon, but the carbon can become radioactive and may need special disposal.
  • Radon in air first: if the air is high, sub-slab ventilation (soil gas mitigation) is the main fix. Water treatment is added when the water contributes.

Aeration systems need a vent, a pump and regular maintenance, and they may open the water to bacteria if not properly designed, so choose a qualified installer. Ask whether the system includes a disinfection step.

SafetyAeration systems and pumps involve electrical work. Turn off the power at the breaker and hire a licensed pro if you are not sure.

What to do right now

  1. Test indoor airUse a radon test kit or a professional in the lowest lived-in level.
  2. Test the waterIf you have a bedrock well, ask a certified lab.
  3. Fix air firstMitigate indoor air if it is high.
  4. Treat water if neededChoose aeration or carbon with a qualified installer.

Common mistakes

  • Testing the water but not the air
  • Assuming that drinking the water is the main risk
  • Letting the sample sit open before sending it
  • Installing carbon without a plan for disposal

Why bedrock wells matter

Radon is a gas made from uranium in rock. Wells that draw from fractured bedrock, especially granite, are more likely to carry radon than shallow wells in sand or gravel. Water that moves slowly through the rock has more time to pick up the gas, and deep wells can deliver it quickly to your tap.

If you share a well or have an older home with a dug well, ask a certified lab or your state radon office about local patterns. The same house can have high radon in the air and low radon in the water, or the other way round.

Where the risk comes from in the house

  • Showers and baths release radon into the bathroom air
  • Laundry and dishwashers release some more
  • Soil gas through cracks in the foundation is the main source in most homes
  • Sealed, energy-efficient homes can hold radon longer

This is why fixing the air first, and then checking the water, is the order most radon programs follow. A radon professional can tell you whether a water treatment system is worth adding.

Reading results and next steps

Order of action
Air resultWater resultAction
LowLowRetest air in a few years
HighLowFix air with soil-gas mitigation
HighHighFix air first; ask a pro about aeration
LowHighAsk your state radon office about water treatment

State radon offices can often point you to certified testers and to licensed mitigation contractors. They know local patterns better than any national chart.

Aeration or carbon: which fits

Aeration is the usual choice when radon in water is high, because it vents the gas outdoors and does not leave radioactive carbon behind. Carbon is cheaper at first and simple to fit, and it can work at lower levels, but the bed holds radon and its decay products, so ask the supplier how the spent carbon is handled.

Whichever you choose, test the treated water for radon a few weeks after installation, and test indoor air again, because the goal is lower radon where you breathe.

Questions people ask

Can radon be in well water?

Yes. Radon can dissolve into groundwater, especially in bedrock wells in areas with uranium-bearing rock.

What are acceptable radon levels in well water?

EPA has no final federal standard. Start by testing indoor air, and ask your state radon office what applies locally.

How do I test well water for radon?

Use a certified lab and follow its special sampling instructions, since radon escapes quickly.

How do I remove radon from well water?

Aeration is the most effective method. Granular activated carbon can work, but carbon disposal needs care.

Sources

This page explains general practice for US private wells. Check your state's rules on the state pages, use a certified lab for testing, and hire a licensed well contractor for electrical or well work. See our editorial policy.

Still not sure what to do?

Ask us about your situation. A real person reads every question.

This field is required.
We reply by email. We never share it without your permission.Enter an email address like name@example.com.
Describe what you are seeing and anything you have tried. Plain words are fine.Please write at least 20 characters so we can help.
Choose your state so we can point you to the right rules.
Prefer the full form?

Thanks, we have your question.

We read every message and reply by email, usually within a few working days. If it is urgent (sickness, a positive E. coli test, or a flooded well), use bottled water and call your county or state health department now.

Find your state's well program

Keep reading

Related guides

All 35 contaminants guides