Ask a question

Septic contamination of a well: signs, risks and what to do

4 min readBy Updated Sources checked6 sources
Clear glass of water on a grey surface
Photo: Unsplash
Short answerSeptic contamination happens when waste water from a failing or poorly placed septic system reaches your well. Signs include positive coliform or E. coli, rising nitrate, and sometimes slow drains or odors. Stop drinking untreated water, test, and have the septic system and wellhead inspected by licensed pros.

Key facts

How a septic system can affect a well

A septic system treats household waste water in a tank and then releases it into the soil. If the system fails, or is too close to a well, untreated or partly treated waste can move into groundwater. A shallow well, a cracked casing, sandy soil or a high water table all raise the risk.

State and local codes set minimum distances between wells and septic systems, and the numbers differ by state and by soil type. Ask your county health or building department what applies to your property.

Signs of septic contamination

  • Positive total coliform or E. coli on a lab test
  • Rising nitrate over time
  • Slow drains, gurgling, sewage odors or wet spots over the drain field
  • Foamy water or a detergent or soapy smell
  • Cloudy water after heavy rain or heavy use of the septic system

Not every sign shows up in every case. Many wells with septic contamination look and taste normal, so test results are the key evidence.

What the tests mean

Which result points to septic
ResultWhat it suggests
E. coli presentWaste contamination; urgent
High nitrate with bacteriaSeptic or manure may be the source
Chloride and sodium up togetherWaste water or softener discharge
Ammonia or detergent tracesWaste water near the well

No single test proves septic is the cause, but a pattern across several results points that way. A licensed septic inspector can check the tank and field, and a licensed well contractor can check the wellhead.

SafetyIf E. coli is present, do not drink the water untreated. Use bottled water, or water boiled as your health department directs, and call your county or state health department.

What to do right now

  1. Switch to safe waterUse bottled or boiled water for drinking and cooking.
  2. TestGet coliform, E. coli, nitrate and chloride from a certified lab.
  3. InspectHire licensed pros to inspect the septic tank, field and wellhead.
  4. DisinfectShock chlorinate the well once the cause is fixed, following a state or extension guide.
  5. RetestResample 1 to 2 weeks later, then again at a later date.

Protecting a well from septic problems

  • Pump and inspect the septic tank on the schedule your inspector advises
  • Avoid parking or driving over the drain field
  • Keep the well cap tight and the casing sound
  • Do not flush chemicals, solvents or large amounts of grease
  • Keep trees and heavy roots away from the drain field
  • Use water evenly instead of doing all the laundry in one day

If the well is too close to the septic system and cannot be protected, you may need a new, deeper and properly sealed well, or a longer-term treatment system as a backup.

Common mistakes

  • Treating the water without inspecting the septic
  • Using additives that claim to fix a failing system
  • Assuming a recent pump-out solved the problem
  • Disinfecting the well while the septic system is still leaking

Questions for the inspectors

  • How far is my well from the tank and the drain field, and does that meet code?
  • Is the tank sound, and are the baffles and filters in good shape?
  • Is the drain field wet, compacted or failing?
  • Is the well cap, casing and seal in good shape?
  • Is the well deep enough and cased far enough down for my soil?

Ask each inspector to put findings in writing. If you plan to sell, these records also help buyers and lenders.

Why nitrate and bacteria both matter

Bacteria tell you that waste may be reaching the well right now. Nitrate tells you about a longer pattern, since it moves through soil and persists. A well with high nitrate and no bacteria may have a nitrate source nearby, such as a septic plume, even though bacteria are filtered out by soil. A well with both has a more direct pathway and needs faster action.

For this reason, test both each year, and if you have a septic system within a short distance of your well, test twice a year for a while.

Recording the evidence

Write down the date and result of every bacteria and nitrate test, along with rainfall and septic pump-outs. If bacteria show up soon after heavy rain, surface flow or a high water table is probably pushing septic water toward the well. If results are steady, a leak or a drain field problem is more likely.

Take photos of any wet spots, odors and standing water around the drain field and the well. A licensed inspector and your county health office can use them.

Disposal rules for chlorinated water

After shock chlorination, the first water you flush out has a lot of chlorine, and it can harm a septic system if it all goes down the drain at once. Follow your extension guide on how to flush, and spread the flush over time or route the first flush outdoors onto a hard surface away from the well and plants, as local rules allow.

Ask the septic inspector how much water your system can take at once, since a system that is already struggling should not be flooded.

Questions people ask

How far does a well have to be from a septic tank?

It depends on your state and local code, and often on soil. Check with your county health or building department.

How do I know if my septic is contaminating my well?

Look for positive coliform or E. coli, rising nitrate, and signs of septic trouble on your property. A professional inspection confirms the source.

Is it safe to drink well water near a septic system?

Only if tests show it is free of bacteria and nitrate is below 10 mg/L (as N). Test at least once a year.

Can a septic problem go away on its own?

Not usually. A failing system needs repair, and the well needs disinfection and retesting.

Sources

This page explains general practice for US private wells. Check your state's rules on the state pages, use a certified lab for testing, and hire a licensed well contractor for electrical or well work. See our editorial policy.

Still not sure what to do?

Ask us about your situation. A real person reads every question.

This field is required.
We reply by email. We never share it without your permission.Enter an email address like name@example.com.
Describe what you are seeing and anything you have tried. Plain words are fine.Please write at least 20 characters so we can help.
Choose your state so we can point you to the right rules.
Prefer the full form?

Thanks, we have your question.

We read every message and reply by email, usually within a few working days. If it is urgent (sickness, a positive E. coli test, or a flooded well), use bottled water and call your county or state health department now.

Find your state's well program

Keep reading

Related guides

All 35 contaminants guides