Ask a question

Sodium in well water: sources, health questions and fixes

4 min readBy Updated Sources checked5 sources
Hand holding a clear glass of drinking water
Photo: Unsplash
Short answerSodium in well water can be natural, or it can come from road salt, septic systems and water softeners. There is no federal drinking water limit for sodium. It matters most for people on a sodium-restricted diet, who should talk to their doctor. Reverse osmosis at one tap is the usual way to lower sodium in drinking water.

Key facts

What sodium in water means

Sodium is a common mineral, and nearly all well water has some. Natural levels depend on the rock and soil. Humans also add sodium to groundwater through road de-icing salt, septic waste, fertilizer and water softener discharge.

Sodium is the metal part of table salt. Chloride is the other half, so salty water usually shows up in tests as both. High sodium by itself may have little taste, while high sodium with chloride tastes salty.

Is there a federal limit?

Sodium is not in EPA's primary drinking water standards table, so there is no enforceable federal limit. EPA's secondary standards cover chloride at 250 mg/L and total dissolved solids at 500 mg/L, which are related taste guidelines. The concern for sodium is about diet, not about poisoning, so health agencies talk about it in that context.

Who should pay attention

People who have been told by a doctor to limit sodium, such as people with high blood pressure, heart or kidney disease, may want to know the sodium in their drinking water. If that is you, share your lab result with your doctor and ask what level of sodium in water is reasonable for your plan. Do not guess a safe level.

Where sodium comes from

  • Water softeners: ion exchange swaps calcium and magnesium for sodium, so softened water has more sodium
  • Road salt: runoff reaches shallow wells
  • Septic systems: household waste carries salt
  • Natural sources: some aquifers are naturally salty
  • Fertilizer and some chemicals: occasional contributions

If your sodium rose after you installed a softener, the softener is a likely cause. A potassium-based softener salt is one option, but check the cost and the manual, and ask your doctor, since some people need to limit potassium too.

How to test

Ask a certified lab for sodium along with chloride, hardness and total dissolved solids. If you have a softener, take one sample from a tap before the softener and one after, if your plumbing lets you, so you can see how much sodium it adds. Label the bottles clearly so the lab report is easy to read.

Treatment options

Lowering sodium in drinking water
MethodNotes
Reverse osmosis at the kitchen tapThe common fix for drinking and cooking water
DistillationRemoves sodium; small volumes
Bypass line or a separate unsoftened tapKeeps one cold tap on untreated water if sodium comes from softening
Potassium chloride in the softenerSwaps sodium for potassium; check with your doctor
Boiling, carbon or sediment filtersDo not remove sodium

The simplest approach in many homes is to leave one cold tap in the kitchen on unsoftened water for drinking and cooking, or to add a reverse osmosis unit. Whole-house sodium removal is costly and rarely needed.

What to do right now

  1. TestGet sodium and chloride from a certified lab.
  2. Share with your doctorIf you are on a sodium-restricted diet.
  3. Find the sourceCheck the softener, road salt and septic.
  4. Treat the drinking tapUse RO or an unsoftened cold tap.

Common mistakes

  • Assuming softened water has no sodium
  • Using softened water for baby formula without checking with a doctor
  • Adding more salt to the softener than needed
  • Trying to remove sodium with a carbon pitcher

Reading your sodium result

What to do by situation
SituationMeaningAction
You are on a sodium-restricted dietDrinking water adds to your total sodiumShare the lab number with your doctor
Sodium and chloride are both highSalt from road, septic or the aquiferFind the source; RO for drinking water
Sodium rose after installing a softenerSoftener added itKeep one tap unsoftened or use RO
Sodium high, chloride lowNatural sodium in the rock, or softenerCheck softener use and hardness

Sodium is often reported in mg/L. Your doctor may talk about milligrams per day in your diet, so ask how to relate the two for your household's water use.

Softeners and sodium

A softener that removes 20 grains of hardness per gallon adds more sodium than one removing 5, so the dose depends on your hardness. If you want soft water but need low sodium, a potassium-based salt, a partial bypass or a separate unsoftened tap can help, and a doctor can say whether potassium is suitable for you.

Softener makers publish sodium added per grain of hardness removed in their literature, so ask the dealer for the number for your model.

Testing before and after a softener

A before-and-after sample pair shows how much sodium your softener adds. Draw one sample from the tap on the raw side, ahead of the softener, and one from a softened tap. The difference is the sodium the softener swapped in. Write the numbers beside the hardness result, because a harder well means a bigger swap.

If your plumbing has no raw tap, ask the plumber to add a small sampling valve ahead of the softener. It makes every future test easier and cheaper.

Talking to your doctor about drinking water

Doctors who ask a patient to lower sodium usually think about food first, since water adds only a part of the total. Still, softened water can add a meaningful share in some homes. Bring the lab number and your daily water use, and ask what to do about the drinking tap.

Questions people ask

How do I test well water for sodium?

Ask a certified lab for sodium, and add chloride and TDS. If you have a softener, sample before and after it.

Does a water softener add sodium?

Yes. Ion exchange swaps hardness minerals for sodium, so softened water has more sodium.

Is there a federal limit for sodium in drinking water?

No. It is not in EPA's primary standards table. The concern is mainly for people on a sodium-restricted diet.

How do I lower sodium in drinking water?

Reverse osmosis at one tap, distillation, or leaving one tap unsoftened.

Sources

This page explains general practice for US private wells. Check your state's rules on the state pages, use a certified lab for testing, and hire a licensed well contractor for electrical or well work. See our editorial policy.

Still not sure what to do?

Ask us about your situation. A real person reads every question.

This field is required.
We reply by email. We never share it without your permission.Enter an email address like name@example.com.
Describe what you are seeing and anything you have tried. Plain words are fine.Please write at least 20 characters so we can help.
Choose your state so we can point you to the right rules.
Prefer the full form?

Thanks, we have your question.

We read every message and reply by email, usually within a few working days. If it is urgent (sickness, a positive E. coli test, or a flooded well), use bottled water and call your county or state health department now.

Find your state's well program

Keep reading

Related guides

All 35 contaminants guides