Ask a question

VOCs, gasoline and MTBE in well water: what to do

5 min readBy Updated Sources checked3 sources
Clear glass of water on a grey surface
Photo: Unsplash
Short answerVOCs (volatile organic compounds) include gasoline components like benzene, solvents and MTBE. If well water smells like fuel or chemicals, stop drinking and cooking with it, ventilate, and call your health department. EPA's limit for benzene is 0.005 mg/L. Carbon filters or air stripping can treat many VOCs after the source is found.

Key facts

SafetyA strong gasoline, fuel oil or solvent smell is a sign to act. Stop drinking and cooking with the water, ventilate the house, avoid open flames, and call your county or state health department and environmental agency.

What VOCs are

VOCs are chemicals that evaporate easily. In well water they usually come from gasoline, fuel oil, dry cleaning solvents, degreasers and industrial chemicals. Benzene, toluene, ethylbenzene and xylenes come from gasoline. Trichloroethylene (TCE) and tetrachloroethylene (PCE) are solvents.

MTBE is a fuel additive that was widely used in gasoline. It dissolves easily and spreads far in groundwater. It is not listed in EPA's table of primary drinking water standards, so check with your state, since some states set their own limits.

The federal numbers

Examples of EPA limits (MCLs) for VOCs
ChemicalMCL (mg/L)
Benzene0.005
Trichloroethylene0.005
Tetrachloroethylene0.005
Vinyl chloride0.002
Toluene1
Ethylbenzene0.7
Xylenes (total)10

These limits apply to public systems. Private wells are not regulated, so the numbers are benchmarks for you. Some people notice a smell below the limit, and some chemicals have no smell, so smell is not a reliable test.

Where VOCs come from

  • Leaking underground fuel tanks, at homes, farms and gas stations
  • Spills of fuel oil, solvents or paint thinners near the well
  • Old dumps and landfills
  • Septic systems used for cleaners or solvents
  • Dry cleaners, repair shops and industrial sites upstream

Health effects

Health effects depend on the chemical, the amount and how long people are exposed. EPA sets limits based on long-term risks, and benzene and vinyl chloride have cancer risk concerns at long-term exposure. VOCs can also enter air during showers, so ventilation matters. Ask your health department and doctor about your specific result.

How to test

Ask a certified lab for a VOC panel, and ask whether it includes MTBE and BTEX (benzene, toluene, ethylbenzene, xylenes). VOCs escape quickly, so follow the lab's kit steps exactly, usually with sealed vials that must have no air bubbles. Tell the lab if you smell fuel, since it may change the panel.

VOC samples go in small glass vials with preservative that must be filled to the brim, with no air bubble, and kept cold. The lab often sends two or three vials plus a trip blank. Call the lab before you sample and ask for a panel that includes BTEX, MTBE, TCE and PCE, and the detection limits for each.

Treatment options

VOC treatment
MethodNotes
Granular activated carbonCommon for many VOCs; carbon is used up and must be replaced
Air stripping or aerationRemoves volatile chemicals by moving air through the water; vent outdoors
Reverse osmosisPoint-of-use; may not remove all VOCs well
Boiling, softener or sediment filterDo not work, and boiling can release vapors indoors

Treatment should be sized by an experienced professional, with water tests before and after. It is not a replacement for finding and stopping the source. A leaking tank or spill needs cleanup, and your state environmental agency can help.

What to do right now

  1. Stop using the waterDo not drink, cook with it or use it for baby formula.
  2. VentilateOpen windows, and avoid flames or smoking.
  3. CallYour health department and state environmental agency.
  4. TestGet a VOC panel from a certified lab.
  5. Treat and fix the sourceUse carbon or aeration, and find the leak.

Common mistakes

  • Using the water because the smell seems faint
  • Boiling the water, which can release vapors into the house
  • Pouring the tainted water out near the well
  • Using a basic sediment filter, which does not remove dissolved chemicals
  • Treating the water without looking for a leaking tank or a spill

Keep a record of when you first noticed the smell, how strong it was and what changed nearby. If a fuel tank is nearby, an inspection may be needed, and some states have programs that help with tank leaks. Your state environmental agency can tell you what applies where you live.

Reporting a suspected spill

If you suspect a tank leak or a spill near your well, tell your state environmental agency, which can order a site check and may have a cleanup fund for leaking tanks. Write down the date you noticed the smell, the strength of it, and where it was strongest.

Do not run water just to see if the smell fades, since that moves contaminated water through your plumbing and septic system. Use bottled water for drinking and cooking, and keep the windows open while you wait for advice.

Fuel smells that are not fuel

Not every chemical smell means gasoline. A plastic or musty smell can come from new pipe, a water heater, a drain or a sewer gas problem. A test is the way to tell the difference, but until you have the result, treat a fuel smell as real and avoid the water for drinking and cooking.

If the smell is only at the hot tap, a plumber should look at the heater before you spend money on a VOC panel.

Vapors in the house

VOCs can leave the water as vapor in showers, dishwashers and washing machines. If the smell is strong, ventilate bathrooms and the laundry area, take short showers until you have advice, and keep the water away from open flames. Do not run extra water through the hot water tank to test the smell, since that spreads the contamination into the plumbing.

A public health agency can tell you whether the level is a short-term worry or a long-term one once it sees the lab report.

Questions people ask

Why does my well water smell like gasoline?

A fuel smell suggests gasoline or fuel oil may be in the water, from a leak or spill. Stop using the water for drinking and call your health department.

What is the benzene limit in drinking water?

EPA's limit is 0.005 mg/L for public systems.

Is MTBE regulated?

It is not listed in EPA's primary drinking water standards table. Some states set their own limits, so ask your state agency.

Can a carbon filter remove VOCs?

Granular activated carbon works for many VOCs when properly sized and replaced, but test before and after.

Sources

This page explains general practice for US private wells. Check your state's rules on the state pages, use a certified lab for testing, and hire a licensed well contractor for electrical or well work. See our editorial policy.

Still not sure what to do?

Ask us about your situation. A real person reads every question.

This field is required.
We reply by email. We never share it without your permission.Enter an email address like name@example.com.
Describe what you are seeing and anything you have tried. Plain words are fine.Please write at least 20 characters so we can help.
Choose your state so we can point you to the right rules.
Prefer the full form?

Thanks, we have your question.

We read every message and reply by email, usually within a few working days. If it is urgent (sickness, a positive E. coli test, or a flooded well), use bottled water and call your county or state health department now.

Find your state's well program

Keep reading

Related guides

All 35 contaminants guides