Ask a question

Is well water safe to drink?

4 min readBy Updated Sources checked8 sources
Water being poured into a glass next to a potted plant
Photo: Unsplash
Short answerWell water can be safe to drink, but you cannot tell by looking, smelling or tasting it. No agency tests a private well for you. The owner is responsible. Test with a state-certified lab at least once a year for coliform bacteria and nitrate, and again after flooding, repairs or any change in taste, smell or color.

Key facts

The short answer

Many private wells deliver good water for decades. But safety is not a given, and it is not checked for you. City water systems are tested on a schedule and must report problems. A private well has none of that. The household is the water utility.

A USGS study of 2,100 domestic wells found that about 1 in 5 had at least one contaminant above a human-health benchmark. That is not a reason for alarm. It is a reason to test once and then keep testing on a schedule.

Why you cannot judge safety by taste or smell

Water can look clear and taste fine while carrying bacteria or nitrate. Nitrate has no color, taste or odor. Bacteria cannot be seen without a lab test.

The reverse is also true. Rotten-egg smell, orange staining or hard water are annoying, but they are often cosmetic problems rather than health problems. Only a lab result tells the two apart.

What can make well water unsafe

  • Bacteria. Coliform bacteria are an indicator that surface contamination may be reaching the well. E. coli means waste is likely in the water.
  • Nitrate. It comes from fertilizer, septic systems and animal waste. It is a particular concern for babies under six months.
  • Natural elements. Arsenic, uranium and radium can come from the rock around the well. USGS estimates about 2.1 million people use domestic wells with arsenic above 10 micrograms per liter.
  • Chemicals. Fuels, solvents, pesticides and PFAS can enter a well from nearby sources. Local land use matters here.

Can well water make you sick?

Yes, it can, if disease-causing bacteria or certain chemicals are in it. If disease-causing bacteria are present, common symptoms include stomach upset, cramps, fever and diarrhea. Children and older adults are most at risk. Visitors who are not used to the local water can get sick even when the household does not.

These symptoms look like many other illnesses. Testing is the only reliable way to link them to your water. If someone is ill, see a doctor and test the water at the same time.

How to check your own well

  1. Find a certified labAsk your county or state health department for a list of state-certified labs. Many also tell you how to collect the sample.
  2. Test the basicsStart with total coliform bacteria and nitrate. EPA also lists total dissolved solids and pH for an annual checkup. Add other tests based on local geology and land use.
  3. Collect the sample exactly as toldUse the lab's sterile bottle and follow their instructions. A badly collected sample can give a false result.
  4. Act on the resultIf a result is above a health standard, switch to another water source for drinking and cooking and call your health department. Retest after any fix.
SafetyIf a test shows E. coli, or nitrate above 10 mg/L, do not drink the water untreated. Use bottled water or another safe source for drinking, cooking and baby formula, and call your county or state health department for next steps.

What common results mean

Reading a first lab report
ResultWhat it suggestsWhat to do
Total coliform absentNo sign of surface contamination at the time of samplingRetest next year, or sooner after any trigger
Total coliform present, E. coli absentA pathway for contamination may existDo not rely on the water for babies or anyone ill; confirm with a retest and call the health department
E. coli presentWaste is likely in the waterStop drinking it untreated; use bottled water; contact the health department and a well professional
Nitrate above 10 mg/L (as N)Above the federal limit; risk for infantsUse bottled water for infants and formula; find the source

A single clean result is a snapshot. Bacteria counts can rise after weeks of warm, wet weather and fall in cold, dry conditions, so one test on one day does not guarantee the next.

Why shallow and older wells deserve extra attention

Soil and rock filter bacteria as water moves down, so shallow wells and springs are more vulnerable than deep ones. Deep wells are not immune. Poor construction, a damaged casing or a nearby septic system can let contamination in.

Wells with a cracked casing, a loose or missing cap, or ground that slopes toward the wellhead are at higher risk. Walk around your wellhead once in a while and look for these problems. A quick look costs nothing.

Who should be extra careful

Infants, pregnant people, older adults and anyone with a weakened immune system have less room for error. EPA says to test more often when these people live in the home. If you are expecting a baby, test the well before the baby comes home.

If you rent a home on a well, ask the landlord for the latest test results. Do not assume that someone has tested it.

When to test more often

Test sooner than the annual schedule when the well or its surroundings change. EPA lists these triggers:

  • Flooding, land disturbance or new construction nearby
  • Repairs or replacement of any part of the well system
  • A change in the water's taste, smell or color
  • A baby, a pregnant person, a nursing person or an older adult in the home, which calls for more frequent testing

Keep every lab report. A history of results shows trends that a single test cannot.

Questions people ask

Is well water safe to drink without a filter?

It depends on what a lab test finds. Clear water can still carry bacteria or nitrate. If your tests are clean and stay clean, many households drink well water with no treatment. If a test finds a problem, treat or replace the source based on the result, not a guess.

Can well water make you sick?

Yes, if it carries disease-causing bacteria or high levels of certain chemicals. Stomach upset, cramps, fever and diarrhea are common signs of bacterial contamination. Only testing can link symptoms to the water.

How do I know if my well water is safe to drink?

Test it. Use a state-certified lab for total coliform bacteria and nitrate every year, plus other tests that fit your area. Taste, smell and clarity are not reliable signs of safety.

Who checks private well water?

No one does by default. The federal government does not regulate private well water, and most states do not either. The owner is responsible for testing and fixing problems.

Sources

This page explains general practice for US private wells. Check your state's rules on the state pages, use a certified lab for testing, and hire a licensed well contractor for electrical or well work. See our editorial policy.

Still not sure what to do?

Ask us about your situation. A real person reads every question.

This field is required.
We reply by email. We never share it without your permission.Enter an email address like name@example.com.
Describe what you are seeing and anything you have tried. Plain words are fine.Please write at least 20 characters so we can help.
Choose your state so we can point you to the right rules.
Prefer the full form?

Thanks, we have your question.

We read every message and reply by email, usually within a few working days. If it is urgent (sickness, a positive E. coli test, or a flooded well), use bottled water and call your county or state health department now.

Find your state's well program

Keep reading

Related guides

All 24 safety and disinfection guides