Ask a question
96 ftmedian well depth4th deepest of 6 in AK
247household well recordsState well records
Near 0people est. on high-arsenic wellsUSGS model
15 gpmmedian tested yieldDriller-reported
At a glanceThe figures come from 247 household well records, a smaller sample than most, so read them as a rough guide. Manganese stands out in measured groundwater: 95% of 21 sampled wells were over the EPA lifetime health advisory. Wells here are productive, with a median tested yield of 15 gallons per minute, more than in about 100% of Alaska counties. The water table sits close to the surface: drillers logged a median static water level of only 14 ft. Fairbanks North Star County has about 95,460 residents on 7,335 square miles. It borders Denali, Southeast Fairbanks and Yukon-Koyukuk counties. It lies in northwestern Alaska.

Manganese is the one to test for in Fairbanks North Star County

Manganese stands out in measured groundwater: 95% of 21 sampled wells were over the EPA lifetime health advisory.

SubstanceWells testedOver limitMedianLimit usedYears
Nitrate (as N)630%0.025 mg/L as NEPA MCL1994 to 2003
Manganese2195%0.96 mg/LEPA lifetime health advisory1996 to 1997
Iron2488%3.735 mg/LEPA SMCL1995 to 1997
Fluoride10528%0.2 mg/LEPA MCL1994 to 2022
Hardness73no data227 mg/L as CaCO3over 180 mg/L is very hard1994 to 1997

Latest result per well since 1990, Water Quality Portal; 286 results across 5 substances.

Arsenic estimate

USGS estimates very few people in Fairbanks North Star County on household wells with arsenic above 10 µg/L, but a single well can still test high. USGS model estimate.

What to test for in Fairbanks North Star County

  • Coliform bacteria and nitrate every year. With wells this shallow and water this close to the surface, these matter most.
  • Arsenic: the county estimate ranks above about 100% of Alaska counties.
  • Manganese: 95% of sampled wells here were over the EPA lifetime health advisory.
  • Iron: 88% of sampled wells here were over the EPA SMCL.
  • Fluoride: 28% of sampled wells here were over the EPA MCL.
  • Hardness if you are thinking about a softener (sampled median 227 mg/L).

Got results already? Check them with our result interpreter.

Shallow wells in Fairbanks North Star County

groundmiddle half of wells: 40 ft–220 ftwater level 14 ftmedian well 96 ftdeepest 10% start at 323 ft
To scale: ground, the median water level at 14 ft and the median well bottom at 96 ft in Fairbanks North Star County.
Household well records247
Median depth96 ft
Middle half of wells40 ft to 220 ft
Shallowest 10% / deepest 10%under 40 ft / over 323 ft
Median static water level14 ft
Median tested yield15 gpm
Rank in Alaska (deepest = 1)4th of 6
Deeper than this share of US counties in our data23%

Most wells with a recorded depth fall under 100 ft (50%). Only 2% reach 500 ft or more.

Between the median water level and the median depth sit about 82 ft of water, roughly 120 gallons in a 6-inch casing.

Wells here are productive, with a median tested yield of 15 gallons per minute, more than in about 100% of Alaska counties.

A 96 ft well is cheap to drill

Shallow wells keep drilling costs down. At $25 to $65 a foot (Angi 2026 cost guide), reaching Fairbanks North Star County's median of 96 ft costs about $2,400 to $6,200 for the hole itself.

That is small next to local house prices: under 2% of the median home value of $298,200 (Census ACS 2020–2024).

With water only 14 ft down, some homes can use a shallow-well jet pump, which lifts water about 25 feet at most; the rest need a submersible. See pump sizing.

Drilling over the decades in Fairbanks North Star County

Much of the drilling is recent: the busiest decade was the 2020s, with 109 household wells logged. 100% of dated records are from 2010 or later, a sign of steady new drilling.

Buying a home with a well in Fairbanks North Star County

  • The median home here was built in 1985. Ask the seller for the well log, or look it up in the state well records.
  • A well between 40 ft and 220 ft is normal for Fairbanks North Star County. Much shallower than 40 ft deserves a careful water test.
  • A flow test should be routine; county wells are productive, with a median of 15 gallons per minute.
  • Make sure the water test includes manganese; 95% of sampled local wells were over its limit.

Fairbanks North Star County next to its neighbours

All 1 neighbours with records have deeper median wells, from Denali County (124 ft) to Denali County (124 ft).

CountyMedian depthWater levelYieldPeople on high-arsenic wells (est.)
Fairbanks North Star County96 ft14 ft15 gpmnear 0
Denali County124 ft76 ft5 gpmnear 0
Southeast Fairbanks Countyno datano datano datanear 0
Yukon-Koyukuk Countyno datano datano datanear 0

Neighbours: Census county adjacency 2024.

Help in Alaska

For Fairbanks North Star County well owners: Alaska Department of Environmental Conservation, Drinking Water Program, and all Alaska well rules and data.

Questions about wells in Fairbanks North Star County

How deep are wells in Fairbanks North Star County, Alaska?

The median is 96 ft across 247 records, but depths vary a lot: the middle half run from 40 ft to 220 ft.

Is well water safe to drink in Fairbanks North Star County?

Manganese stands out in measured groundwater: 95% of 21 sampled wells were over the EPA lifetime health advisory.

How much water does a Fairbanks North Star County well produce?

The median tested yield is 15 gallons per minute, high for the state.

How far down is the water in Fairbanks North Star County wells?

Driller logs put the median static water level at 14 ft below ground, which is shallow enough to make surface contamination a real risk.

Data for Fairbanks North Star County

247 household well records, dated from the 2010s to the 2020s, from the state well records (source); homes and population from Census ACS 2020–2024. How we filter the records. Download Fairbanks North Star County as JSON (CC BY 4.0).

Questions about a well in Fairbanks North Star County?

Ask us about your situation. A real person reads every question.

This field is required.
We reply by email. We never share it without your permission.Enter an email address like name@example.com.
Describe what you are seeing and anything you have tried. Plain words are fine.Please write at least 20 characters so we can help.
Choose your state so we can point you to the right rules.
Prefer the full form?

Thanks, we have your question.

We read every message and reply by email, usually within a few working days. If it is urgent (sickness, a positive E. coli test, or a flooded well), use bottled water and call your county or state health department now.

Find your state's well program