# Private wells in Power County, Idaho

By Rohit S, Editor and data lead, PrivateWell. Updated 19 November 2026.

## At a glance

Wells in Power County run deeper than in most of Idaho. The median household well is 225 ft, against a state median of 200 ft. The figures come from 300 household well records, a smaller sample than most, so read them as a rough guide. About 30% of Power County is over the Pacific Northwest basin-fill aquifers (unconsolidated sand and gravel aquifers), with 24% over the Snake River Plain basaltic-rock aquifers. Its wells are deeper than those of all 5 neighbouring counties with records. The median tested yield is 25 gallons per minute. Power County is a rural county of about 8,133 people spread over 1,404 square miles. Its 21 household well records per 100 square miles are among the sparsest in the state. It borders Bannock, Bingham, Blaine, Cassia and Oneida counties. It lies in southeastern Idaho.

## Power County and the Pacific Northwest basin-fill aquifers

About 30% of Power County is over the Pacific Northwest basin-fill aquifers (unconsolidated sand and gravel aquifers), with 24% over the Snake River Plain basaltic-rock aquifers. Among the 5 counties in our data that sit mainly over the same aquifer (across 2 states), Power County's median well of 225 ft is deeper than most: deeper than about 100% of them. Pacific Northwest basin-fill aquifers 30% Snake River Plain basaltic-rock aquifers 24% Outside principal aquifers 24% Snake River Plain basin-fill aquifers 15% Uppermost principal aquifer: USGS Principal Aquifers map , sampled across the county on a grid. A well can draw from a deeper or local aquifer instead.

## Wells in Power County run deeper than most of Idaho

Household well records 300 Median depth 225 ft Middle half of wells 180 ft to 318 ft Shallowest 10% / deepest 10% under 129 ft / over 410 ft Median static water level 80 ft Median tested yield 25 gpm Rank in Idaho (deepest = 1) 13th of 44 Deeper than this share of US counties in our data 76% Under 100 ft 2% 100 to 300 ft 69% 300 to 500 ft 24% 500 ft or more 5% Most wells with a recorded depth fall 100 to 300 ft (69%). Between the median water level and the median depth sit about 145 ft of water, roughly 213 gallons in a 6-inch casing. The median tested yield is 25 gallons per minute.

## Power County has deeper wells than every neighbour

None of its 5 neighbours with records has a deeper median well. The neighbours range from Bingham County (120 ft) to Oneida County (220 ft). County Median depth Water level Yield People on high-arsenic wells (est.) Power County 225 ft 80 ft 25 gpm 256 Oneida County 220 ft 83 ft 30 gpm 129 Bannock County 200 ft 71 ft 25 gpm 616 Cassia County 183 ft 76 ft 20 gpm 846 Blaine County 140 ft 44 ft 40 gpm 41 Bingham County 120 ft 60 ft 25 gpm 1,700 Neighbours: Census county adjacency 2024.

## Water quality in Power County

In measured groundwater samples, iron was the most common problem, with 4% of 50 tested wells over the EPA SMCL. Substance Wells tested Over limit Median Limit used Years Arsenic 50 2% 2.3 µg/L EPA MCL 1990 to 2011 Nitrate (as N) 62 3% 1.345 mg/L as N EPA MCL 1990 to 2025 Manganese 50 0% 0.0005 mg/L EPA lifetime health advisory 1990 to 2011 Iron 50 4% 0.0041 mg/L EPA SMCL 1990 to 2011 Fluoride 55 0% 0.39 mg/L EPA MCL 1990 to 2011 Lead 49 0% 0.5 µg/L EPA action level 1990 to 2010 Radon 26 0% 430 pCi/L EPA AMCL 1991 to 1995 Hardness 51 no data 234 mg/L as CaCO3 over 180 mg/L is very hard 1990 to 2011 Latest result per well since 1990, Water Quality Portal ; 393 results across 8 substances. Arsenic estimate About 256 people in Power County (range 194 to 331) are estimated by USGS to be on household wells above the 10 µg/L arsenic limit, a middling figure for Idaho. That is more than in about 43% of Idaho counties. USGS model estimate . What to test for in Power County Coliform bacteria and nitrate once a year, the EPA baseline for any private well. Arsenic: USGS estimates about 256 people here drink from household wells above the 10 µg/L limit. Hardness if you are thinking about a softener (sampled median 234 mg/L). Got results already? Check them with our result interpreter .

## Drilling a 225 ft well in Power County

Half of all wells here go past 200 ft, so expect a bigger drilling bill: 225 ft at $25 to $65 a foot ( Angi 2026 cost guide ) is about $5,600 to $14,600 . Against a median home value of $212,900 (Census ACS 2020–2024), a new well at that depth is about 3% to 7% of a house's worth, before equipment. With a typical water level of 80 ft, homes here use either a deep-well jet pump or a submersible, depending on yield. Price the pump separately from drilling.

## Drilling over the decades in Power County

Much of the drilling is recent: the busiest decade was the 2000s, with 109 household wells logged. 63% of dated records are from 2010 or later, a sign of steady new drilling.

## Buying a home with a well in Power County

The median home here was built in 1975. Ask the seller for the well log, or look it up in Wells (well driller's reports), Idaho Department of Water Resources. A well between 180 ft and 318 ft is normal for Power County. Much shallower than 180 ft deserves a careful water test. A flow test should be routine; county wells are productive, with a median of 25 gallons per minute. Make sure the water test includes iron; 4% of sampled local wells were over its limit.

## Questions

### What is the average well depth in Power County, Idaho?

225 ft is the median across 300 household well records; the middle half are 180 ft to 318 ft.

### How much water does a Power County well produce?

The median tested yield is 25 gallons per minute.

### What aquifer do wells in Power County draw from?

About 30% of Power County is over the Pacific Northwest basin-fill aquifers (unconsolidated sand and gravel aquifers), with 24% over the Snake River Plain basaltic-rock aquifers. Your own well log names the formation your well actually taps.

### Are wells in Power County deeper than elsewhere in Idaho?

Yes: Power County ranks deeper than about 70% of Idaho counties in our data, and deeper than 76% of US counties we cover.

### How far down is the water in Power County wells?

Driller logs put the median static water level at 80 ft below ground.

## Sources

- Wells (well driller's reports), Idaho Department of Water Resources: https://gis.idwr.idaho.gov/hosting/rest/services/Groundwater/Wells/FeatureServer/0
- USGS county arsenic model (Ayotte and others, 2017): https://doi.org/10.5066/F7CN724V
- U.S. Census Bureau, American Community Survey 2020-2024 5-year estimates (tables B01003, B25035, B25077, B25003): https://www.census.gov/programs-surveys/acs/data/summary-file.html
- U.S. Census Bureau 2024 Gazetteer Files (counties): https://www.census.gov/geographies/reference-files/time-series/geo/gazetteer-files.html
- Water Quality Portal: https://www.waterqualitydata.us/
- County data as JSON (CC BY 4.0): https://privatewell.org/data/counties/16077.json
- Page: https://privatewell.org/states/idaho/power-county/

Cite as: PrivateWell (2026). Private well statistics for Power County, Idaho. https://privatewell.org/states/idaho/power-county/ (accessed 19 November 2026).
