# Private wells in Parke County, Indiana

By Rohit S, Editor and data lead, PrivateWell. Updated 19 November 2026.

## At a glance

Parke County is one of the deepest-well counties in Indiana: its median household well goes down 130 ft, deeper than about 86% of the 91 Indiana counties in our data. 2,102 household well records feed these figures. Static water levels are among the deeper ones in the state, with a median of 45 ft below ground. Most of Parke County (99%) lies outside any USGS principal aquifer, so wells draw on smaller, local water-bearing rock; the rest is over the Mississippian aquifers. Parke County has about 16,406 residents on 445 square miles. It borders Clay, Fountain, Montgomery, Putnam, Vermillion and Vigo counties. It lies in western Indiana.

## Wells in Parke County run deeper than most of Indiana

Household well records 2,102 Median depth 130 ft Middle half of wells 95 ft to 174 ft Shallowest 10% / deepest 10% under 66 ft / over 225 ft Median static water level 45 ft Median tested yield 10 gpm Rank in Indiana (deepest = 1) 13th of 91 Deeper than this share of US counties in our data 42% Under 100 ft 27% 100 to 300 ft 70% 300 to 500 ft 2% 500 ft or more 0% Most wells with a recorded depth fall 100 to 300 ft (70%). Between the median water level and the median depth sit about 85 ft of water, roughly 125 gallons in a 6-inch casing. The median tested yield is 10 gallons per minute.

## Parke County next to its neighbours

Only 1 of 6 neighbouring counties with records have a deeper median well; nearby medians span from Vigo County (63 ft) to Clay County (158 ft). County Median depth Water level Yield People on high-arsenic wells (est.) Parke County 130 ft 45 ft 10 gpm 271 Clay County 158 ft 30 ft 7 gpm 321 Vermillion County 128 ft 35 ft 10 gpm 116 Fountain County 110 ft 29 ft 12 gpm 623 Putnam County 101 ft 25 ft 10 gpm 298 Montgomery County 81 ft 24 ft 10 gpm 1,325 Vigo County 63 ft 26 ft 10 gpm 647 Neighbours: Census county adjacency 2024.

## What drilling to 130 ft costs in Parke County

Using $25 to $65 per foot for drilling only ( Angi 2026 cost guide ), a well at the median depth of 130 ft runs about $3,200 to $8,400 . Against a median home value of $151,200 (Census ACS 2020–2024), a new well at that depth is about 2% to 6% of a house's worth, before equipment. With a typical water level of 45 ft, homes here use either a deep-well jet pump or a submersible, depending on yield. Price the pump separately from drilling.

## Water quality in Parke County

Public sampling data for Parke County is thin (fewer than 10 wells with recent results), so the arsenic model below is the best county-level guide. Arsenic estimate The USGS arsenic model puts about 271 Parke County residents (range 219 to 336) on household wells above 10 µg/L, lower than most Indiana counties. That is more than in about 39% of Indiana counties. USGS model estimate . What to test for in Parke County Coliform bacteria and nitrate once a year, the EPA baseline for any private well. Arsenic: USGS estimates about 271 people here drink from household wells above the 10 µg/L limit.

## What lies beneath Parke County

Most of Parke County (99%) lies outside any USGS principal aquifer, so wells draw on smaller, local water-bearing rock; the rest is over the Mississippian aquifers. Outside principal aquifers 99% Mississippian aquifers 1% Uppermost principal aquifer: USGS Principal Aquifers map , sampled across the county on a grid. A well can draw from a deeper or local aquifer instead.

## Drilling over the decades in Parke County

Depths have barely changed over time: 127 ft for wells before 1990 and 124 ft since 2010. The 1990s were the busiest decade, with 492 new household wells on record. Only 3% of dated records are from 2010 or later, so most wells in service are older.

## Buying a home with a well in Parke County

The median home here was built in 1972. Ask the seller for the well log, or look it up in the state well records. A well between 95 ft and 174 ft is normal for Parke County. Much shallower than 95 ft deserves a careful water test. Ask for a flow or yield test and compare it with the county median of 10 gallons per minute. Book a well inspection as well as a water test; they check different things .

## Questions

### What is the average well depth in Parke County, Indiana?

130 ft is the median across 2,102 household well records; the middle half are 95 ft to 174 ft.

### How far down is the water in Parke County wells?

Driller logs put the median static water level at 45 ft below ground.

### Are wells in Parke County deeper than elsewhere in Indiana?

Yes: Parke County ranks deeper than about 86% of Indiana counties in our data, and deeper than 42% of US counties we cover.

### What would a new well in Parke County cost to drill?

Roughly $3,200 to $8,400 for the drilling at the median depth of 130 ft, before the pump and pressure tank.

## Sources

- IN DNR Water Well Records (Water Well Record Database), Indiana Department of Natural Resources, Division of Water: https://gisdata.in.gov/server/rest/services/Hosted/WaterWells_DNR_Water_IN_1/FeatureServer/0
- USGS county arsenic model (Ayotte and others, 2017): https://doi.org/10.5066/F7CN724V
- U.S. Census Bureau, American Community Survey 2020-2024 5-year estimates (tables B01003, B25035, B25077, B25003): https://www.census.gov/programs-surveys/acs/data/summary-file.html
- U.S. Census Bureau 2024 Gazetteer Files (counties): https://www.census.gov/geographies/reference-files/time-series/geo/gazetteer-files.html
- County data as JSON (CC BY 4.0): https://privatewell.org/data/counties/18121.json
- Page: https://privatewell.org/states/indiana/parke-county/

Cite as: PrivateWell (2026). Private well statistics for Parke County, Indiana. https://privatewell.org/states/indiana/parke-county/ (accessed 19 November 2026).
