Ask a question
85 ftmedian well depth64th deepest of 87 in KY
1,647household well recordsState well records
1,348people est. on high-arsenic wellsUSGS model
35 ftmedian water levelDriller-reported
At a glance1,647 household well records feed these figures. Arsenic is a bigger issue than in most of Kentucky: USGS estimates about 1,348 people here (range 938 to 1,926) use household wells above 10 µg/L. All or nearly all of Pike County sits over the Pennsylvanian aquifers (sandstone aquifers), the uppermost principal aquifer USGS maps here. Pike County has about 56,727 residents on 786 square miles. It borders Floyd, Knott, Letcher and Martin counties, plus 4 counties in Virginia, West Virginia. It lies in eastern Kentucky.

How Pike County stands out in Kentucky

  • Large by area: 786 square miles of land, the largest of the 87 Kentucky counties on this site.
  • Very little surface water: lakes and rivers cover under 1% of the county, one of the lowest shares in Kentucky.
  • A deep driller archive: 1,647 household well records, 3rd most of 87 Kentucky counties.
  • One of the most varied well-depth patterns in Kentucky: the middle half spans 60 ft to 140 ft.

Closest look-alike: Martin County next door. Compared with it, Pike County has more people estimated on high-arsenic wells (1,348 vs 94), median home values $25,100 higher and water standing 6 ft further down.

Closest match further away: Clay County elsewhere in Kentucky. Next to it, Pike County has more people estimated on high-arsenic wells (1,348 vs 92), median home values $21,300 higher and homes 4 years older by median year built.

Arsenic in Pike County wells

Public sampling data for Pike County is thin (fewer than 10 wells with recent results), so the arsenic model below is the best county-level guide.

Arsenic estimate

Arsenic is a bigger issue than in most of Kentucky: USGS estimates about 1,348 people here (range 938 to 1,926) use household wells above 10 µg/L. USGS model estimate.

What to test for in Pike County

  • Coliform bacteria and nitrate every year; 57% of wells here are under 100 ft deep.
  • Arsenic: USGS estimates about 1,348 people here drink from household wells above the 10 µg/L limit.

Shallow wells in Pike County

groundmiddle half of wells: 60 ft–140 ftwater level 35 ftmedian well 85 ftdeepest 10% start at 205 ft
To scale: ground, the median water level at 35 ft and the median well bottom at 85 ft in Pike County.
Household well records1,647
Median depth85 ft
Middle half of wells60 ft to 140 ft
Shallowest 10% / deepest 10%under 45 ft / over 205 ft
Median static water level35 ft
Rank in Kentucky (deepest = 1)64th of 87
Deeper than this share of US counties in our data18%

Most wells with a recorded depth fall under 100 ft (57%). Only 1% reach 500 ft or more.

Between the median water level and the median depth sit about 50 ft of water, roughly 74 gallons in a 6-inch casing.

Pike County and the Pennsylvanian aquifers

All or nearly all of Pike County sits over the Pennsylvanian aquifers (sandstone aquifers), the uppermost principal aquifer USGS maps here. Among the 97 counties in our data that sit mainly over the same aquifer (across 5 states), Pike County's median well of 85 ft is shallower than most: deeper than about 19% of them.

Uppermost principal aquifer: USGS Principal Aquifers map, sampled across the county on a grid. A well can draw from a deeper or local aquifer instead.

Pike County next to its neighbours

Floyd County: median depth 102 ftKnott County: median depth 102 ftLetcher County: median depth 120 ftMartin County: median depth 85 ftBuchanan County, VA: no well records in our dataDickenson County, VA: no well records in our dataWise County, VA: median depth 275 ftMingo County, WV: no well records in our dataPike County: median depth 85 ft<50 ft50-100 ft100-200 ft200-300 ft300-500 ft500+ ft
Pike County (orange outline) and its neighbours by median well depth. Grey counties have no records in our data.

4 of 5 neighbouring counties with records drill deeper. Medians nearby run from Martin County (85 ft) to Wise County (275 ft).

CountyMedian depthWater levelYieldPeople on high-arsenic wells (est.)
Pike County85 ft35 ftno data1,348
Wise County, VA275 ft74 ft8 gpm17
Letcher County120 ft30 ftno data326
Floyd County102 ft35 ftno data44
Knott County102 ft45 ftno data242
Martin County85 ft29 ftno data94
Buchanan County, VAno datano datano data186
Dickenson County, VAno datano datano data10
Mingo County, WVno datano datano data253

Neighbours: Census county adjacency 2024.

A 85 ft well is cheap to drill

Shallow wells keep drilling costs down. At $25 to $65 a foot (Angi 2026 cost guide), reaching Pike County's median of 85 ft costs about $2,100 to $5,500 for the hole itself.

That is small next to local house prices: under 5% of the median home value of $112,000 (Census ACS 2020–2024).

With a typical water level of 35 ft, homes here use either a deep-well jet pump or a submersible, depending on yield. Price the pump separately from drilling.

Drilling over the decades in Pike County

1980s83 ft1990s85 ft2000s124 ft

The 1980s were the busiest decade, with 691 new household wells on record. Only 0% of dated records are from 2010 or later, so most wells in service are older.

Buying a home with a well in Pike County

  • The median home here was built in 1985. Ask the seller for the well log, or look it up in the state well records.
  • A well between 60 ft and 140 ft is normal for Pike County. Much shallower than 60 ft deserves a careful water test.
  • Book a well inspection as well as a water test; they check different things.

Help in Kentucky

For Pike County well owners: Kentucky Energy and Environment Cabinet, Division of Water, certified labs in Kentucky, and all Kentucky well rules and data.

Questions about wells in Pike County

How deep are wells in Pike County, Kentucky?

85 ft is the median across 1,647 household well records; the middle half are 60 ft to 140 ft.

Is well water safe to drink in Pike County?

Arsenic is the main known risk, with about 1,348 people estimated on high-arsenic wells. Only a certified lab test of your own well can say.

What aquifer do wells in Pike County draw from?

All or nearly all of Pike County sits over the Pennsylvanian aquifers (sandstone aquifers), the uppermost principal aquifer USGS maps here. Your own well log names the formation your well actually taps.

Are wells in Pike County deeper than elsewhere in Kentucky?

No, they are shallower: Pike County ranks deeper than about 26% of Kentucky counties in our data, and deeper than 18% of US counties we cover.

How far down is the water in Pike County wells?

Driller logs put the median static water level at 35 ft below ground.

Data for Pike County

1,647 household well records, dated from the 1980s to the 2000s, from the state well records (source); homes and population from Census ACS 2020–2024. How we filter the records. Download Pike County as JSON (CC BY 4.0).

Questions about a well in Pike County?

Ask us about your situation. A real person reads every question.

This field is required.
We reply by email. We never share it without your permission.Enter an email address like name@example.com.
Describe what you are seeing and anything you have tried. Plain words are fine.Please write at least 20 characters so we can help.
Choose your state so we can point you to the right rules.
Prefer the full form?

Thanks, we have your question.

We read every message and reply by email, usually within a few working days. If it is urgent (sickness, a positive E. coli test, or a flooded well), use bottled water and call your county or state health department now.

Find your state's well program