How Franklin County stands out in Maine
- Very little surface water: lakes and rivers cover 3% of the county, one of the lowest shares in Maine.
- One of the less populous counties we cover in Maine, with about 30,413 residents (2nd smallest of 16).
- One of the most uniform well-depth patterns in Maine: the middle half spans 180 ft to 340 ft.
- Newer housing than most of Maine: the median home was built in 1978, the 4th newest of 16 counties.
Closest look-alike: Androscoggin County next door. Compared with it, Franklin County has fewer people estimated on high-arsenic wells (2,170 vs 9,698), homes 9 years newer by median year built and median home values $58,100 lower.
Closest match further away: Cumberland County elsewhere in Maine. Next to it, Franklin County has fewer people estimated on high-arsenic wells (2,170 vs 5,972), median home values $256,500 lower and wells about 20 ft shallower at the median.
Wells in Franklin County run deeper than most of Maine
| Household well records | 3,197 |
|---|---|
| Median depth | 260 ft |
| Middle half of wells | 180 ft to 340 ft |
| Shallowest 10% / deepest 10% | under 125 ft / over 430 ft |
| Median static water level | 15 ft |
| Median tested yield | 6 gpm |
| Rank in Maine (deepest = 1) | 4th of 16 |
| Deeper than this share of US counties in our data | 82% |
Most wells with a recorded depth fall 100 to 300 ft (55%).
A typical well here holds a deep column of water, about 245 ft, or 360 gallons in a 6-inch casing. That reserve covers short bursts of heavy use while the aquifer refills the well.
The median tested yield is 6 gallons per minute. See options for low-yield wells.
New wells in Franklin County are going deeper
New wells are going much deeper: those completed since 2010 have a median of 320 ft, against 200 ft before 1990. Much of the drilling is recent: the busiest decade was the 2020s, with 813 household wells logged. 44% of dated records are from 2010 or later, a sign of steady new drilling.
Drilling a 260 ft well in Franklin County
Half of all wells here go past 200 ft, so expect a bigger drilling bill: 260 ft at $25 to $65 a foot (Angi 2026 cost guide) is about $6,500 to $16,900.
Against a median home value of $194,700 (Census ACS 2020–2024), a new well at that depth is about 3% to 9% of a house's worth, before equipment.
With water only 15 ft down, some homes can use a shallow-well jet pump, which lifts water about 25 feet at most; the rest need a submersible. See pump sizing.
Water quality in Franklin County
Public sampling data for Franklin County is thin (fewer than 10 wells with recent results), so the arsenic model below is the best county-level guide.
Arsenic estimate
The USGS arsenic model puts about 2,170 Franklin County residents (range 1,616 to 2,830) on household wells above 10 µg/L, lower than most Maine counties. That is more than in about 31% of Maine counties. USGS model estimate.
What to test for in Franklin County
- Coliform bacteria and nitrate every year. With wells this shallow and water this close to the surface, these matter most.
- Arsenic: USGS estimates about 2,170 people here drink from household wells above the 10 µg/L limit.
What lies beneath Franklin County
Most of Franklin County (100%) lies outside any USGS principal aquifer, so wells draw on smaller, local water-bearing rock.
Uppermost principal aquifer: USGS Principal Aquifers map, sampled across the county on a grid. A well can draw from a deeper or local aquifer instead.
Buying a home with a well in Franklin County
- The median home here was built in 1978. Ask the seller for the well log, or look it up in the state well records.
- A well between 180 ft and 340 ft is normal for Franklin County. Much shallower than 180 ft deserves a careful water test.
- Ask for a flow or yield test and compare it with the county median of 6 gallons per minute.
- Book a well inspection as well as a water test; they check different things.
Franklin County next to its neighbours
2 of 4 neighbouring counties with records drill deeper. Medians nearby run from Kennebec County (240 ft) to Oxford County (340 ft).
| County | Median depth | Water level | Yield | People on high-arsenic wells (est.) |
|---|---|---|---|---|
| Franklin County | 260 ft | 15 ft | 6 gpm | 2,170 |
| Oxford County | 340 ft | 18 ft | 5 gpm | 6,217 |
| Androscoggin County | 297 ft | 15 ft | 6 gpm | 9,698 |
| Somerset County | 245 ft | 10 ft | 6 gpm | 7,247 |
| Kennebec County | 240 ft | 13 ft | 7 gpm | 15,277 |
Neighbours: Census county adjacency 2024.
Help in Maine
For Franklin County well owners: Maine CDC, Department of Health and Human Services, certified labs in Maine, free or low-cost testing, and all Maine well rules and data.
Questions about wells in Franklin County
What is the average well depth in Franklin County, Maine?
260 ft is the median across 3,197 household well records; the middle half are 180 ft to 340 ft.
How far down is the water in Franklin County wells?
Driller logs put the median static water level at 15 ft below ground, which is shallow enough to make surface contamination a real risk.
Are wells getting deeper in Franklin County?
New wells are going much deeper: those completed since 2010 have a median of 320 ft, against 200 ft before 1990.
Are wells in Franklin County deeper than elsewhere in Maine?
Yes: Franklin County ranks deeper than about 75% of Maine counties in our data, and deeper than 82% of US counties we cover.
Data for Franklin County
3,197 household well records, dated from the 1960s to the 2020s, from the state well records (source); homes and population from Census ACS 2020–2024. How we filter the records. Download Franklin County as JSON (CC BY 4.0).
