How Miller County stands out in Missouri
- Wells are packed in: 493 household well records per 100 square miles, 20th densest in Missouri.
- Newer housing than most of Missouri: the median home was built in 1985, the 22nd newest of 103 counties.
- A deep driller archive: 2,924 household well records, 24th most of 103 Missouri counties.
Closest look-alike: Morgan County next door. Compared with it, Miller County has water standing 16 ft further down, wells about 10 ft deeper at the median and more people estimated on high-arsenic wells (208 vs 204).
Closest match further away: Benton County elsewhere in Missouri. Next to it, Miller County has more people estimated on high-arsenic wells (208 vs 121) and wells about 10 ft shallower at the median.
Arsenic in Miller County wells
Public sampling data for Miller County is thin (fewer than 10 wells with recent results), so the arsenic model below is the best county-level guide.
Arsenic estimate
Arsenic is a bigger issue than in most of Missouri: USGS estimates about 208 people here (range 153 to 287) use household wells above 10 µg/L. USGS model estimate.
What to test for in Miller County
- Coliform bacteria and nitrate once a year, the EPA baseline for any private well.
- Arsenic: USGS estimates about 208 people here drink from household wells above the 10 µg/L limit.
Wells in Miller County are shallower than most of Missouri
| Household well records | 2,924 |
|---|---|
| Median depth | 260 ft |
| Middle half of wells | 210 ft to 325 ft |
| Shallowest 10% / deepest 10% | under 180 ft / over 390 ft |
| Median static water level | 92 ft |
| Median tested yield | 30 gpm |
| Rank in Missouri (deepest = 1) | 68th of 103 |
| Deeper than this share of US counties in our data | 82% |
Most wells with a recorded depth fall 100 to 300 ft (64%). Only 2% reach 500 ft or more.
A typical well here holds a deep column of water, about 168 ft, or 248 gallons in a 6-inch casing. That reserve covers short bursts of heavy use while the aquifer refills the well.
The median tested yield is 30 gallons per minute.
Miller County and the Ozark Plateaus aquifer system
All or nearly all of Miller County sits over the Ozark Plateaus aquifer system (carbonate-rock aquifers), the uppermost principal aquifer USGS maps here. Among the 77 counties in our data that sit mainly over the same aquifer (across 4 states), Miller County's median well of 260 ft is shallower than most: deeper than about 18% of them.
Uppermost principal aquifer: USGS Principal Aquifers map, sampled across the county on a grid. A well can draw from a deeper or local aquifer instead.
Drilling a 260 ft well in Miller County
Half of all wells here go past 200 ft, so expect a bigger drilling bill: 260 ft at $25 to $65 a foot (Angi 2026 cost guide) is about $6,500 to $16,900.
Against a median home value of $192,600 (Census ACS 2020–2024), a new well at that depth is about 3% to 9% of a house's worth, before equipment.
Water at 92 ft is beyond what jet pumps can lift, so plan on a submersible pump and wiring sized for that lift.
Miller County next to its neighbours
6 of 7 neighbouring counties with records drill deeper. Medians nearby run from Morgan County (250 ft) to Osage County (330 ft).
| County | Median depth | Water level | Yield | People on high-arsenic wells (est.) |
|---|---|---|---|---|
| Miller County | 260 ft | 92 ft | 30 gpm | 208 |
| Osage County | 330 ft | 120 ft | 35 gpm | 67 |
| Pulaski County | 315 ft | 148 ft | 30 gpm | 13 |
| Moniteau County | 295 ft | 80 ft | 30 gpm | 94 |
| Maries County | 290 ft | 120 ft | 30 gpm | 75 |
| Cole County | 287 ft | 100 ft | 40 gpm | 116 |
| Camden County | 280 ft | 90 ft | 30 gpm | 434 |
| Morgan County | 250 ft | 75 ft | 30 gpm | 204 |
Neighbours: Census county adjacency 2024.
Drilling over the decades in Miller County
Wells completed since 2010 are somewhat deeper (median 286 ft) than those drilled before 1990 (230 ft). Much of the drilling is recent: the busiest decade was the 2000s, with 857 household wells logged.
Buying a home with a well in Miller County
- The median home here was built in 1985. Ask the seller for the well log, or look it up in the state well records.
- A well between 210 ft and 325 ft is normal for Miller County. Much shallower than 210 ft deserves a careful water test.
- A flow test should be routine; county wells are productive, with a median of 30 gallons per minute.
- Book a well inspection as well as a water test; they check different things.
Help in Missouri
For Miller County well owners: all Missouri well rules and data.
Questions about wells in Miller County
What is the average well depth in Miller County, Missouri?
260 ft is the median across 2,924 household well records; the middle half are 210 ft to 325 ft.
Is well water safe to drink in Miller County?
Arsenic is the main known risk, with about 208 people estimated on high-arsenic wells. Only a certified lab test of your own well can say.
What aquifer do wells in Miller County draw from?
All or nearly all of Miller County sits over the Ozark Plateaus aquifer system (carbonate-rock aquifers), the uppermost principal aquifer USGS maps here. Your own well log names the formation your well actually taps.
How much water does a Miller County well produce?
The median tested yield is 30 gallons per minute.
What would a new well in Miller County cost to drill?
Roughly $6,500 to $16,900 for the drilling at the median depth of 260 ft, before the pump and pressure tank.
Data for Miller County
2,924 household well records, dated from the 1980s to the 2020s, from the state well records (source); homes and population from Census ACS 2020–2024. How we filter the records. Download Miller County as JSON (CC BY 4.0).
