How Howard County stands out in Nebraska
- Higher-priced homes: a median owner-occupied value of $209,100, 15th highest among 93 Nebraska counties here.
- Wells are packed in: 147 household well records per 100 square miles, 16th densest in Nebraska.
- Unusually wet: lakes and rivers cover 1% of the county, the 20th highest share in Nebraska.
Closest look-alike: Hall County next door. Compared with it, Howard County has fewer people estimated on high-arsenic wells (293 vs 632), water standing 12 ft further down and homes 12 years older by median year built.
Closest match further away: Holt County elsewhere in Nebraska. Next to it, Howard County has median home values $44,000 higher, more people estimated on high-arsenic wells (293 vs 252) and wells about 3 ft deeper at the median.
How deep wells go in Howard County
| Household well records | 838 |
|---|---|
| Median depth | 120 ft |
| Middle half of wells | 70 ft to 173 ft |
| Shallowest 10% / deepest 10% | under 57 ft / over 245 ft |
| Median static water level | 23 ft |
| Median tested yield | 20 gpm |
| Rank in Nebraska (deepest = 1) | 57th of 93 |
| Deeper than this share of US counties in our data | 38% |
Most wells with a recorded depth fall 100 to 300 ft (60%).
Between the median water level and the median depth sit about 97 ft of water, roughly 143 gallons in a 6-inch casing.
Wells here are productive, with a median tested yield of 20 gallons per minute, more than in about 98% of Nebraska counties.
Arsenic in Howard County wells
Public sampling data for Howard County is thin (fewer than 10 wells with recent results), so the arsenic model below is the best county-level guide.
Arsenic estimate
Arsenic is a bigger issue than in most of Nebraska: USGS estimates about 293 people here (range 228 to 376) use household wells above 10 µg/L. USGS model estimate.
What to test for in Howard County
- Coliform bacteria and nitrate once a year, the EPA baseline for any private well.
- Arsenic: USGS estimates about 293 people here drink from household wells above the 10 µg/L limit.
Howard County and the High Plains aquifer
All or nearly all of Howard County sits over the High Plains aquifer (unconsolidated sand and gravel aquifers), the uppermost principal aquifer USGS maps here. Among the 180 counties in our data that sit mainly over the same aquifer (across 8 states), Howard County's median well of 120 ft is shallower than most: deeper than about 33% of them.
Uppermost principal aquifer: USGS Principal Aquifers map, sampled across the county on a grid. A well can draw from a deeper or local aquifer instead.
What drilling to 120 ft costs in Howard County
Using $25 to $65 per foot for drilling only (Angi 2026 cost guide), a well at the median depth of 120 ft runs about $3,000 to $7,800.
That is small next to local house prices: under 4% of the median home value of $209,100 (Census ACS 2020–2024).
With a typical water level of 23 ft, homes here use either a deep-well jet pump or a submersible, depending on yield. Price the pump separately from drilling.
Buying an older home with a well in Howard County
- The median home in Howard County was built in 1963. Older homes often have older wells, so ask when the well was drilled and whether the casing, cap and pump have been replaced.
- A well between 70 ft and 173 ft is normal for Howard County. Much shallower than 70 ft deserves a careful water test.
- A flow test should be routine; county wells are productive, with a median of 20 gallons per minute.
- Book a well inspection as well as a water test; they check different things.
Drilling over the decades in Howard County
Much of the drilling is recent: the busiest decade was the 2000s, with 286 household wells logged. 39% of dated records are from 2010 or later, a sign of steady new drilling.
Howard County next to its neighbours
3 of 6 neighbouring counties with records drill deeper. Medians nearby run from Merrick County (52 ft) to Greeley County (234 ft).
| County | Median depth | Water level | Yield | People on high-arsenic wells (est.) |
|---|---|---|---|---|
| Howard County | 120 ft | 23 ft | 20 gpm | 293 |
| Greeley County | 234 ft | 80 ft | 20 gpm | 38 |
| Buffalo County | 224 ft | 64 ft | 20 gpm | 1,064 |
| Sherman County | 220 ft | 46 ft | 17 gpm | 150 |
| Hall County | 105 ft | 11 ft | 20 gpm | 632 |
| Nance County | 105 ft | 30 ft | 16 gpm | 86 |
| Merrick County | 52 ft | 9 ft | 20 gpm | 200 |
Neighbours: Census county adjacency 2024.
Help in Nebraska
For Howard County well owners: Nebraska Department of Water, Energy, and Environment, free or low-cost testing, and all Nebraska well rules and data.
Questions about wells in Howard County
What is the average well depth in Howard County, Nebraska?
120 ft is the median across 838 household well records; the middle half are 70 ft to 173 ft.
How much water does a Howard County well produce?
The median tested yield is 20 gallons per minute, high for the state.
What aquifer do wells in Howard County draw from?
All or nearly all of Howard County sits over the High Plains aquifer (unconsolidated sand and gravel aquifers), the uppermost principal aquifer USGS maps here. Your own well log names the formation your well actually taps.
Is well water safe to drink in Howard County?
Arsenic is the main known risk, with about 293 people estimated on high-arsenic wells. Only a certified lab test of your own well can say.
How far down is the water in Howard County wells?
Driller logs put the median static water level at 23 ft below ground.
Data for Howard County
838 household well records, dated from the 1990s to the 2020s, from the state well records (source); homes and population from Census ACS 2020–2024. How we filter the records. Download Howard County as JSON (CC BY 4.0).
