# Private wells in Cheshire County, New Hampshire

By Rohit S, Editor and data lead, PrivateWell. Updated 19 November 2026.

## At a glance

Wells in Cheshire County run deeper than in most of New Hampshire. The median household well is 400 ft, against a state median of 400 ft. 2,126 household well records feed these figures. Iron stands out in measured groundwater: 40% of 10 sampled wells were over the EPA SMCL. Yields are weak by New Hampshire standards: the median tested well gives 7 gallons per minute, less than in about 80% of counties in our state data. Most of Cheshire County (100%) lies outside any USGS principal aquifer, so wells draw on smaller, local water-bearing rock. Cheshire County has about 77,297 residents on 707 square miles. It borders Hillsborough and Sullivan counties, plus 3 counties in Massachusetts, Vermont. It lies in southwestern New Hampshire.

## Iron is the one to test for in Cheshire County

Iron stands out in measured groundwater: 40% of 10 sampled wells were over the EPA SMCL. Substance Wells tested Over limit Median Limit used Years Nitrate (as N) 13 0% 0.025 mg/L as N EPA MCL 1990 to 2011 Manganese 10 20% 0.025 mg/L EPA lifetime health advisory 1990 to 2011 Iron 10 40% 0.0625 mg/L EPA SMCL 1990 to 2011 Fluoride 10 0% 0.5 mg/L EPA MCL 1990 to 2011 Hardness 10 no data 76.3 mg/L as CaCO3 over 180 mg/L is very hard 1990 to 2011 Latest result per well since 1990, Water Quality Portal ; 53 results across 5 substances. Arsenic estimate About 2,982 people in Cheshire County (range 2,202 to 4,004) are estimated by USGS to be on household wells above the 10 µg/L arsenic limit, a middling figure for New Hampshire. That is more than in about 60% of New Hampshire counties. USGS model estimate . What to test for in Cheshire County Coliform bacteria and nitrate every year even in wells this deep (400 ft median); bacteria get in through a cracked cap or casing, not only through the aquifer. Arsenic: USGS estimates about 2,982 people here drink from household wells above the 10 µg/L limit. Iron: 40% of sampled wells here were over the EPA SMCL. Manganese: 20% of sampled wells here were over the EPA lifetime health advisory. Got results already? Check them with our result interpreter .

## Deep wells in Cheshire County

Household well records 2,126 Median depth 400 ft Middle half of wells 260 ft to 500 ft Shallowest 10% / deepest 10% under 186 ft / over 600 ft Median static water level 20 ft Median tested yield 7 gpm Rank in New Hampshire (deepest = 1) 3rd of 10 Deeper than this share of US counties in our data 94% Under 100 ft 2% 100 to 300 ft 28% 300 to 500 ft 41% 500 ft or more 29% The largest group of wells with a recorded depth fall 300 to 500 ft (41%). A typical well here holds a deep column of water, about 380 ft, or 559 gallons in a 6-inch casing. That reserve covers short bursts of heavy use while the aquifer refills the well. Yields are weak by New Hampshire standards: the median tested well gives 7 gallons per minute, less than in about 80% of counties in our state data. See options for low-yield wells .

## Deep wells make drilling in Cheshire County expensive

At 400 ft for a median well, depth drives the bill: $25 to $65 a foot ( Angi 2026 cost guide ) puts drilling alone at $10,000 to $26,000 . A well as deep as the 75th percentile (500 ft) would be $12,500 to $32,500. Against a median home value of $280,100 (Census ACS 2020–2024), a new well at that depth is about 4% to 9% of a house's worth, before equipment. With water only 20 ft down, some homes can use a shallow-well jet pump, which lifts water about 25 feet at most; the rest need a submersible. See pump sizing .

## What lies beneath Cheshire County

Most of Cheshire County (100%) lies outside any USGS principal aquifer, so wells draw on smaller, local water-bearing rock. Uppermost principal aquifer: USGS Principal Aquifers map , sampled across the county on a grid. A well can draw from a deeper or local aquifer instead.

## Cheshire County next to its neighbours

Only 2 of 5 neighbouring counties with records have a deeper median well; nearby medians span from Windham County (260 ft) to Hillsborough County (420 ft). County Median depth Water level Yield People on high-arsenic wells (est.) Cheshire County 400 ft 20 ft 7 gpm 2,982 Hillsborough County 420 ft 25 ft 8 gpm 17,240 Sullivan County 405 ft 25 ft 7 gpm 2,186 Worcester County, MA 340 ft 20 ft 6 gpm 12,238 Franklin County, MA 285 ft 20 ft 6 gpm 1,287 Windham County, VT 260 ft 20 ft 6 gpm 468 Neighbours: Census county adjacency 2024.

## Buying a home with a well in Cheshire County

The median home here was built in 1972. Ask the seller for the well log, or look it up in NHDES / NH Geological Survey Water Well Inventory (well completion reports). Wells here commonly run 260 ft to 500 ft. If the log shows a much shallower well, ask the inspector why. Insist on a flow test: yields are low here (median 7 gallons per minute), and a low-yield well may need a storage tank. Make sure the water test includes iron; 40% of sampled local wells were over its limit.

## Drilling over the decades in Cheshire County

Much of the drilling is recent: the busiest decade was the 2010s, with 991 household wells logged. 84% of dated records are from 2010 or later, a sign of steady new drilling.

## Questions

### How deep do you have to drill for water in Cheshire County, New Hampshire?

400 ft is the median across 2,126 household well records; the middle half are 260 ft to 500 ft.

### Is well water safe to drink in Cheshire County?

Iron stands out in measured groundwater: 40% of 10 sampled wells were over the EPA SMCL. Arsenic is the main known risk, with about 2,982 people estimated on high-arsenic wells.

### How much water does a Cheshire County well produce?

The median tested yield is 7 gallons per minute, low for the state.

### Are wells in Cheshire County deeper than elsewhere in New Hampshire?

Yes: Cheshire County ranks deeper than about 70% of New Hampshire counties in our data, and deeper than 94% of US counties we cover.

## Sources

- NHDES / NH Geological Survey Water Well Inventory (well completion reports): https://gis.des.nh.gov/server/rest/services/Core_GIS_Datasets/DES_Data_Secure/FeatureServer/6
- USGS county arsenic model (Ayotte and others, 2017): https://doi.org/10.5066/F7CN724V
- U.S. Census Bureau, American Community Survey 2020-2024 5-year estimates (tables B01003, B25035, B25077, B25003): https://www.census.gov/programs-surveys/acs/data/summary-file.html
- U.S. Census Bureau 2024 Gazetteer Files (counties): https://www.census.gov/geographies/reference-files/time-series/geo/gazetteer-files.html
- Water Quality Portal: https://www.waterqualitydata.us/
- County data as JSON (CC BY 4.0): https://privatewell.org/data/counties/33005.json
- Page: https://privatewell.org/states/new-hampshire/cheshire-county/

Cite as: PrivateWell (2026). Private well statistics for Cheshire County, New Hampshire. https://privatewell.org/states/new-hampshire/cheshire-county/ (accessed 19 November 2026).
