# Private wells in Texas County, Oklahoma

By Rohit S, Editor and data lead, PrivateWell. Updated 19 November 2026.

## At a glance

Texas County is one of the deepest-well counties in Oklahoma: its median household well goes down 315 ft, deeper than about 97% of the 77 Oklahoma counties in our data. The county has 779 household well records on file, enough for stable medians. Wells here are productive, with a median tested yield of 25 gallons per minute, more than in about 94% of Oklahoma counties. In measured groundwater samples, nitrate (as n) was the most common problem, with 16% of 121 tested wells over the EPA MCL. All or nearly all of Texas County sits over the High Plains aquifer (unconsolidated sand and gravel aquifers), the uppermost principal aquifer USGS maps here. Texas County has about 20,774 residents on 2,041 square miles. It borders Beaver and Cimarron counties, plus 6 counties in Kansas, Texas. It lies in northwestern Oklahoma.

## Deep wells in Texas County

Household well records 779 Median depth 315 ft Middle half of wells 260 ft to 385 ft Shallowest 10% / deepest 10% under 190 ft / over 440 ft Median tested yield 25 gpm Rank in Oklahoma (deepest = 1) 2nd of 77 Deeper than this share of US counties in our data 88% Under 100 ft 2% 100 to 300 ft 37% 300 to 500 ft 55% 500 ft or more 5% Most wells with a recorded depth fall 300 to 500 ft (55%). Wells here are productive, with a median tested yield of 25 gallons per minute, more than in about 94% of Oklahoma counties.

## Nitrate (as N) is the one to test for in Texas County

In measured groundwater samples, nitrate (as n) was the most common problem, with 16% of 121 tested wells over the EPA MCL. Substance Wells tested Over limit Median Limit used Years Nitrate (as N) 121 16% 2.973 mg/L as N EPA MCL 1999 to 2021 Manganese 34 0% 0.005 mg/L EPA lifetime health advisory 1999 to 2021 Iron 34 9% 0.02 mg/L EPA SMCL 1999 to 2021 Fluoride 34 3% 1.685 mg/L EPA MCL 1999 to 2021 Hardness 14 no data 245.5 mg/L as CaCO3 over 180 mg/L is very hard 1999 to 2021 Latest result per well since 1990, Water Quality Portal ; 237 results across 5 substances. Arsenic estimate Arsenic is a bigger issue than in most of Oklahoma: USGS estimates about 335 people here (range 286 to 389) use household wells above 10 µg/L. USGS model estimate . What to test for in Texas County Coliform bacteria and nitrate every year even in wells this deep (315 ft median); bacteria get in through a cracked cap or casing, not only through the aquifer. Arsenic: USGS estimates about 335 people here drink from household wells above the 10 µg/L limit. Iron: 9% of sampled wells here were over the EPA SMCL. Hardness if you are thinking about a softener (sampled median 246 mg/L). Got results already? Check them with our result interpreter .

## Texas County and the High Plains aquifer

All or nearly all of Texas County sits over the High Plains aquifer (unconsolidated sand and gravel aquifers), the uppermost principal aquifer USGS maps here. Among the 180 counties in our data that sit mainly over the same aquifer (across 8 states), Texas County's median well of 315 ft is deeper than most: deeper than about 88% of them. High Plains aquifer 96% Outside principal aquifers 4% Uppermost principal aquifer: USGS Principal Aquifers map , sampled across the county on a grid. A well can draw from a deeper or local aquifer instead.

## Deep wells make drilling in Texas County expensive

At 315 ft for a median well, depth drives the bill: $25 to $65 a foot ( Angi 2026 cost guide ) puts drilling alone at $7,900 to $20,500 . A well as deep as the 75th percentile (385 ft) would be $9,600 to $25,000. Against a median home value of $163,500 (Census ACS 2020–2024), a new well at that depth is about 5% to 13% of a house's worth, before equipment. Equipment and permits come on top; our guide to drilling quotes shows what to ask Oklahoma drillers to itemize.

## New wells in Texas County are going deeper

Wells completed since 2010 are somewhat deeper (median 360 ft) than those drilled before 1990 (260 ft). The 1990s were the busiest decade, with 191 new household wells on record.

## Buying a home with a well in Texas County

The median home here was built in 1976. Ask the seller for the well log, or look it up in Oklahoma Water Resources Board groundwater well records. Wells here commonly run 260 ft to 385 ft. If the log shows a much shallower well, ask the inspector why. A flow test should be routine; county wells are productive, with a median of 25 gallons per minute. Make sure the water test includes nitrate (as N); 16% of sampled local wells were over its limit.

## Texas County next to its neighbours

4 of 8 neighbouring counties with records drill deeper. Medians nearby run from Beaver County (180 ft) to Hansford County (480 ft). County Median depth Water level Yield People on high-arsenic wells (est.) Texas County 315 ft no data 25 gpm 335 Hansford County, TX 480 ft no data no data 81 Sherman County, TX 450 ft no data no data 65 Ochiltree County, TX 412 ft no data no data 184 Stevens County, KS 357 ft 176 ft 50 gpm 221 Seward County, KS 300 ft 198 ft 50 gpm 338 Cimarron County 246 ft no data 20 gpm 146 Morton County, KS 244 ft 120 ft 30 gpm 86 Beaver County 180 ft no data 40 gpm 285 Neighbours: Census county adjacency 2024.

## Questions

### How deep do you have to drill for water in Texas County, Oklahoma?

315 ft is the median across 779 household well records; the middle half are 260 ft to 385 ft.

### Are wells in Texas County deeper than elsewhere in Oklahoma?

Yes: Texas County ranks deeper than about 97% of Oklahoma counties in our data, and deeper than 88% of US counties we cover.

### What aquifer do wells in Texas County draw from?

All or nearly all of Texas County sits over the High Plains aquifer (unconsolidated sand and gravel aquifers), the uppermost principal aquifer USGS maps here. Your own well log names the formation your well actually taps.

### Is well water safe to drink in Texas County?

In measured groundwater samples, nitrate (as n) was the most common problem, with 16% of 121 tested wells over the EPA MCL. Arsenic is the main known risk, with about 335 people estimated on high-arsenic wells.

### How much water does a Texas County well produce?

The median tested yield is 25 gallons per minute, high for the state.

## Sources

- Oklahoma Water Resources Board groundwater well records: https://owrb.csa.ou.edu/server/rest/services/Groundwater/Groundwater_Wells/MapServer/1
- USGS county arsenic model (Ayotte and others, 2017): https://doi.org/10.5066/F7CN724V
- U.S. Census Bureau, American Community Survey 2020-2024 5-year estimates (tables B01003, B25035, B25077, B25003): https://www.census.gov/programs-surveys/acs/data/summary-file.html
- U.S. Census Bureau 2024 Gazetteer Files (counties): https://www.census.gov/geographies/reference-files/time-series/geo/gazetteer-files.html
- Water Quality Portal: https://www.waterqualitydata.us/
- County data as JSON (CC BY 4.0): https://privatewell.org/data/counties/40139.json
- Page: https://privatewell.org/states/oklahoma/texas-county/

Cite as: PrivateWell (2026). Private well statistics for Texas County, Oklahoma. https://privatewell.org/states/oklahoma/texas-county/ (accessed 19 November 2026).
