Ask a question
140 ftmedian well depth26th deepest of 72 in WI
2,852household well recordsState well records
182people est. on high-arsenic wellsUSGS model
60 ftmedian water levelDriller-reported
At a glanceBehind these numbers are 2,852 household wells logged by drillers. Nitrate (as N) stands out in measured groundwater: 40% of 38 sampled wells were over the EPA MCL. Static water levels are among the deeper ones in the state, with a median of 60 ft below ground. New wells are going much deeper: those completed since 2010 have a median of 160 ft, against 109 ft before 1990. Richland County has about 17,205 residents on 586 square miles. It borders Crawford, Grant, Iowa, Sauk and Vernon counties. It lies in southern Wisconsin.

How Richland County stands out in Wisconsin

  • Very little surface water: lakes and rivers cover under 1% of the county, one of the lowest shares in Wisconsin.
  • Its deepest wells go further than in most of Wisconsin: the deepest 10% start at 381 ft, 7th deepest of 72.
  • A thin driller archive: 2,852 household well records, 13th fewest of 72 Wisconsin counties.
  • Older housing than most of Wisconsin: the median home was built in 1971, the 14th oldest of 72 counties.

Closest look-alike: Sauk County next door. Compared with it, Richland County has fewer people estimated on high-arsenic wells (182 vs 563), lower yields (10 vs 18 gpm) and homes 12 years older by median year built.

Closest match further away: Pepin County elsewhere in Wisconsin. Next to it, Richland County has more people estimated on high-arsenic wells (182 vs 92), wells about 25 ft deeper at the median and lower yields (10 vs 12 gpm).

Nitrate (as N) is the one to test for in Richland County

Nitrate (as N) stands out in measured groundwater: 40% of 38 sampled wells were over the EPA MCL.

SubstanceWells testedOver limitMedianLimit usedYears
Nitrate (as N)3840%5.965 mg/L as NEPA MCL1991 to 2023

Latest result per well since 1990, Water Quality Portal; 38 results across 1 substances.

Arsenic estimate

The USGS arsenic model puts about 182 Richland County residents (range 147 to 227) on household wells above 10 µg/L, lower than most Wisconsin counties. That is more than in about 14% of Wisconsin counties. USGS model estimate.

What to test for in Richland County

  • Coliform bacteria and nitrate once a year, the EPA baseline for any private well.
  • Arsenic: USGS estimates about 182 people here drink from household wells above the 10 µg/L limit.

How deep wells go in Richland County

groundmiddle half of wells: 100 ft–205 ftwater level 60 ftmedian well 140 ftdeepest 10% start at 381 ft
To scale: ground, the median water level at 60 ft and the median well bottom at 140 ft in Richland County.
Household well records2,852
Median depth140 ft
Middle half of wells100 ft to 205 ft
Shallowest 10% / deepest 10%under 67 ft / over 381 ft
Median static water level60 ft
Median tested yield10 gpm
Rank in Wisconsin (deepest = 1)26th of 72
Deeper than this share of US counties in our data47%

Most wells with a recorded depth fall 100 to 300 ft (65%). Only 1% reach 500 ft or more.

Between the median water level and the median depth sit about 80 ft of water, roughly 118 gallons in a 6-inch casing.

The median tested yield is 10 gallons per minute. See options for low-yield wells.

New wells in Richland County are going deeper

1980s120 ft1990s128 ft2000s140 ft2010s150 ft2020s160 ft

New wells are going much deeper: those completed since 2010 have a median of 160 ft, against 109 ft before 1990. Much of the drilling is recent: the busiest decade was the 2000s, with 899 household wells logged.

Richland County next to its neighbours

Crawford County: median depth 265 ftGrant County: median depth 240 ftIowa County: median depth 227 ftSauk County: median depth 138 ftVernon County: median depth 235 ftRichland County: median depth 140 ft<50 ft50-100 ft100-200 ft200-300 ft300-500 ft500+ ft
Richland County (orange outline) with 5 neighbouring counties; darker means deeper median wells.

4 of 5 neighbouring counties with records drill deeper. Medians nearby run from Sauk County (138 ft) to Crawford County (265 ft).

CountyMedian depthWater levelYieldPeople on high-arsenic wells (est.)
Richland County140 ft60 ft10 gpm182
Crawford County265 ft166 ft10 gpm145
Grant County240 ft135 ft15 gpm280
Vernon County235 ft138 ft12 gpm309
Iowa County227 ft122 ft20 gpm138
Sauk County138 ft55 ft18 gpm563

Neighbours: Census county adjacency 2024.

What drilling to 140 ft costs in Richland County

Using $25 to $65 per foot for drilling only (Angi 2026 cost guide), a well at the median depth of 140 ft runs about $3,500 to $9,100.

That is small next to local house prices: under 5% of the median home value of $197,500 (Census ACS 2020–2024).

With a typical water level of 60 ft, homes here use either a deep-well jet pump or a submersible, depending on yield. Price the pump separately from drilling.

Richland County and the Cambrian-Ordovician aquifer system

All or nearly all of Richland County sits over the Cambrian-Ordovician aquifer system (sandstone aquifers), the uppermost principal aquifer USGS maps here. Among the 78 counties in our data that sit mainly over the same aquifer (across 5 states), Richland County's median well of 140 ft is near the middle: deeper than about 50% of them.

Uppermost principal aquifer: USGS Principal Aquifers map, sampled across the county on a grid. A well can draw from a deeper or local aquifer instead.

Buying a home with a well in Richland County

  • The median home here was built in 1971. Ask the seller for the well log, or look it up in the state well records.
  • A well between 100 ft and 205 ft is normal for Richland County. Much shallower than 100 ft deserves a careful water test.
  • Insist on a flow test: yields are low here (median 10 gallons per minute), and a low-yield well may need a storage tank.
  • Make sure the water test includes nitrate (as N); 40% of sampled local wells were over its limit.

Help in Wisconsin

For Richland County well owners: University of Wisconsin-Stevens Point, Center for Watershed Science and Education, and all Wisconsin well rules and data.

Questions about wells in Richland County

What is the average well depth in Richland County, Wisconsin?

140 ft is the median across 2,852 household well records; the middle half are 100 ft to 205 ft.

Is well water safe to drink in Richland County?

Nitrate (as N) stands out in measured groundwater: 40% of 38 sampled wells were over the EPA MCL. Arsenic is the main known risk, with about 182 people estimated on high-arsenic wells.

What aquifer do wells in Richland County draw from?

All or nearly all of Richland County sits over the Cambrian-Ordovician aquifer system (sandstone aquifers), the uppermost principal aquifer USGS maps here. Your own well log names the formation your well actually taps.

How far down is the water in Richland County wells?

Driller logs put the median static water level at 60 ft below ground.

Are wells getting deeper in Richland County?

New wells are going much deeper: those completed since 2010 have a median of 160 ft, against 109 ft before 1990.

Data for Richland County

2,852 household well records, dated from the 1980s to the 2020s, from the state well records (source); homes and population from Census ACS 2020–2024. How we filter the records. Download Richland County as JSON (CC BY 4.0).

Questions about a well in Richland County?

Ask us about your situation. A real person reads every question.

This field is required.
We reply by email. We never share it without your permission.Enter an email address like name@example.com.
Describe what you are seeing and anything you have tried. Plain words are fine.Please write at least 20 characters so we can help.
Choose your state so we can point you to the right rules.
Prefer the full form?

Thanks, we have your question.

We read every message and reply by email, usually within a few working days. If it is urgent (sickness, a positive E. coli test, or a flooded well), use bottled water and call your county or state health department now.

Find your state's well program