How Trempealeau County stands out in Wisconsin
- Very little surface water: lakes and rivers cover 1% of the county, one of the lowest shares in Wisconsin.
- Its deepest wells go less far than in most of Wisconsin: the deepest 10% start at 180 ft, 17th shallowest of 72.
- A thin driller archive: 4,105 household well records, 21st fewest of 72 Wisconsin counties.
Closest look-alike: La Crosse County next door. Compared with it, Trempealeau County has fewer people estimated on high-arsenic wells (196 vs 524), median home values $40,300 lower and wells about 8 ft shallower at the median.
Closest match further away: Monroe County elsewhere in Wisconsin. Next to it, Trempealeau County has fewer people estimated on high-arsenic wells (196 vs 538), water standing 5 ft further down and wells about 5 ft deeper at the median.
Nitrate (as N) is the one to test for in Trempealeau County
Nitrate (as N) stands out in measured groundwater: 37% of 67 sampled wells were over the EPA MCL.
| Substance | Wells tested | Over limit | Median | Limit used | Years |
|---|---|---|---|---|---|
| Nitrate (as N) | 67 | 37% | 4.74 mg/L as N | EPA MCL | 1994 to 2025 |
Latest result per well since 1990, Water Quality Portal; 67 results across 1 substances.
Arsenic estimate
The USGS arsenic model puts about 196 Trempealeau County residents (range 156 to 248) on household wells above 10 µg/L, lower than most Wisconsin counties. That is more than in about 15% of Wisconsin counties. USGS model estimate.
What to test for in Trempealeau County
- Coliform bacteria and nitrate once a year, the EPA baseline for any private well.
- Arsenic: USGS estimates about 196 people here drink from household wells above the 10 µg/L limit.
How deep wells go in Trempealeau County
| Household well records | 4,105 |
|---|---|
| Median depth | 100 ft |
| Middle half of wells | 65 ft to 129 ft |
| Shallowest 10% / deepest 10% | under 45 ft / over 180 ft |
| Median static water level | 48 ft |
| Median tested yield | 12 gpm |
| Rank in Wisconsin (deepest = 1) | 41st of 72 |
| Deeper than this share of US counties in our data | 27% |
Most wells with a recorded depth fall 100 to 300 ft (50%). Only 0% reach 500 ft or more.
Between the median water level and the median depth sit about 52 ft of water, roughly 76 gallons in a 6-inch casing.
The median tested yield is 12 gallons per minute.
Trempealeau County and the Cambrian-Ordovician aquifer system
All or nearly all of Trempealeau County sits over the Cambrian-Ordovician aquifer system (sandstone aquifers), the uppermost principal aquifer USGS maps here. Among the 78 counties in our data that sit mainly over the same aquifer (across 5 states), Trempealeau County's median well of 100 ft is shallower than most: deeper than about 31% of them.
Uppermost principal aquifer: USGS Principal Aquifers map, sampled across the county on a grid. A well can draw from a deeper or local aquifer instead.
What drilling to 100 ft costs in Trempealeau County
Using $25 to $65 per foot for drilling only (Angi 2026 cost guide), a well at the median depth of 100 ft runs about $2,500 to $6,500.
That is small next to local house prices: under 3% of the median home value of $216,700 (Census ACS 2020–2024).
With a typical water level of 48 ft, homes here use either a deep-well jet pump or a submersible, depending on yield. Price the pump separately from drilling.
Drilling over the decades in Trempealeau County
Depths have barely changed over time: 97 ft for wells before 1990 and 105 ft since 2010. Much of the drilling is recent: the busiest decade was the 2000s, with 1,394 household wells logged.
Trempealeau County next to its neighbours
Only 2 of 5 neighbouring counties with records have a deeper median well; nearby medians span from Jackson County (77 ft) to Winona County (204 ft).
| County | Median depth | Water level | Yield | People on high-arsenic wells (est.) |
|---|---|---|---|---|
| Trempealeau County | 100 ft | 48 ft | 12 gpm | 196 |
| Winona County, MN | 204 ft | 70 ft | 15 gpm | 243 |
| La Crosse County | 108 ft | 49 ft | 12 gpm | 524 |
| Eau Claire County | 94 ft | 40 ft | 15 gpm | 685 |
| Buffalo County | 90 ft | 40 ft | 15 gpm | 161 |
| Jackson County | 77 ft | 31 ft | 12 gpm | 259 |
Neighbours: Census county adjacency 2024.
Buying a home with a well in Trempealeau County
- The median home here was built in 1977. Ask the seller for the well log, or look it up in the state well records.
- A well between 65 ft and 129 ft is normal for Trempealeau County. Much shallower than 65 ft deserves a careful water test.
- Ask for a flow or yield test and compare it with the county median of 12 gallons per minute.
- Make sure the water test includes nitrate (as N); 37% of sampled local wells were over its limit.
Help in Wisconsin
For Trempealeau County well owners: University of Wisconsin-Stevens Point, Center for Watershed Science and Education, and all Wisconsin well rules and data.
Questions about wells in Trempealeau County
What is the average well depth in Trempealeau County, Wisconsin?
100 ft is the median across 4,105 household well records; the middle half are 65 ft to 129 ft.
Is well water safe to drink in Trempealeau County?
Nitrate (as N) stands out in measured groundwater: 37% of 67 sampled wells were over the EPA MCL. Arsenic is the main known risk, with about 196 people estimated on high-arsenic wells.
What aquifer do wells in Trempealeau County draw from?
All or nearly all of Trempealeau County sits over the Cambrian-Ordovician aquifer system (sandstone aquifers), the uppermost principal aquifer USGS maps here. Your own well log names the formation your well actually taps.
How far down is the water in Trempealeau County wells?
Driller logs put the median static water level at 48 ft below ground.
How much water does a Trempealeau County well produce?
The median tested yield is 12 gallons per minute.
Data for Trempealeau County
4,105 household well records, dated from the 1980s to the 2020s, from the state well records (source); homes and population from Census ACS 2020–2024. How we filter the records. Download Trempealeau County as JSON (CC BY 4.0).
