Key facts
- For disasters other than floods, such as earthquakes or landslides, contact your local or state health department or environmental agency.EPA: Protect Your Home's Water
- Test immediately after land disturbance or other nearby changes, repairs to any part of the well system, and any change in odor, color or taste.EPA: Protect Your Home's Water
- Periodically inspect exposed parts of the well for cracked, corroded or damaged casing, a broken or missing cap, and cracking of surface seals.EPA: Protect Your Home's Water
- Use a state-certified laboratory for drinking water testing; your local health department may offer free private well testing.EPA: Protect Your Home's Water
What we know and what we do not
Wildfire is a different kind of emergency from a flood, and the sources cited in this handbook do not have wildfire-specific rules for private wells. We will not make up numbers or limits. What we can offer is EPA's general guidance for disasters and changes near a well, applied to this situation.
The practical rule is simple: until the well has been inspected and the water tested, treat it as unverified. Use another source for drinking, cooking and baby formula.
Step 1: be safe around the well and power
Fires can damage power lines, panels, wiring and pump houses. Do not touch damaged electrical equipment, and do not restart a pump if there are signs of fire or heat damage.
Step 2: inspect the well
- Look at the wellheadEPA says to check for cracked, corroded or damaged casing, a broken or missing cap, and cracking or settling of surface seals.
- Look at the pump house, wiring and pressure tankCheck for heat damage, melted insulation or exposed conductors. Do not operate damaged equipment.
- Check treatment equipmentFilters, softeners and plastic piping above ground may have been affected. Ask the manufacturer or a pro.
- Photograph anything damagedPhotos help contractors and anyone you need to report to.
- Have a contractor service the well if anything looks wrongA licensed well or pump contractor can repair damage and disinfect the well after repairs.
Step 3: use safe water until you have results
Use bottled water or another source you know is safe until your test results are in. Boiling kills bacteria, but it does not remove nitrate or other dissolved substances, so it is not a replacement for testing.
If the water looks, smells or tastes different, or if there is ash or debris in the system, do not drink it. Call the health department.
Water in the house and pressure tank
If the power was out or the pump house was affected, water in the pressure tank and pipes has been sitting. Flushing helps. Once the well is inspected, the power is safe and a contractor has cleared the system, run water until it is clear. EPA gives this step for floods, and it is a sensible habit after any outage or repair.
If the water does not run clear, or carries ash, sediment or an unusual smell, stop using it for drinking and ask your health department for advice. Do not replace filters until you know the water is clean, because dirty water can foul new cartridges quickly.
Step 4: test
EPA says to test immediately when conditions change near the well, after repairs to any part of the system, and when you notice a change in odor, color or taste. A wildfire often involves all three.
| When | What to test | Why |
|---|---|---|
| As soon as it is safe to collect samples | Total coliform bacteria and nitrate | The standard minimum for any well |
| After any repairs or disinfection | Total coliform bacteria | Work on a well can let bacteria in |
| On the advice of your health department | Other substances | Local agencies know which tests make sense after fires in your area |
| Again after rain or runoff events in the burned area | As advised | Conditions near the well can change |
Use a state-certified lab and follow its collection instructions. Many local health departments offer testing or help with it. Ask them what they know about wells in your fire area.
Sample the right way
- Get sample bottles and instructions from the lab before you collect. Use the sterile bottle for bacteria and follow the lab's instructions exactly.
- Take the sample from a tap you can identify, and write down which one.
- Keep the sample cool and deliver it within the time the lab specifies.
- Tell the lab it is a post-fire test, and ask whether to add any substances for your area.
A poorly collected sample can mislead. If you are unsure, ask the lab or health department to show you or send a technician.
Step 5: ask the right agencies
EPA says to contact your local or state health department or environmental agency for disasters other than floods. They are the ones who will know about local advisories, post-fire testing programs and any special concerns in your area, such as burned structures or stored chemicals nearby.
Also ask whether any public notice covers water near you. A private well gets none by default, so it is worth asking.
If bacteria show up after repairs
If a test finds coliform or E. coli, see the page on positive bacteria tests. In short, use bottled or boiled water, repair the cause and disinfect the well. Retest 10 to 14 days later per Penn State Extension, or two to four weeks later per Minnesota Department of Health.
Prepare before fire season
- Keep a stored supply of drinking water.
- Write down the phone numbers of your health department, a well contractor and a state-certified lab.
- Test your well in a normal year so you have a baseline for comparison.
- Keep the well log, lab reports and repair records where you can reach them quickly.
- Keep the area around the wellhead clear of fuels, chemicals and clutter, as EPA advises for wellhead protection.
Questions people ask
Is well water safe after a wildfire?
Not until the well has been inspected and tested. Use bottled water for drinking and cooking, and have the water tested by a state-certified lab. Call your health department for advice for your area.
Can a wildfire damage a well?
It can damage the pump house, wiring, cap, exposed piping and treatment equipment. Inspect the well before restarting the pump and have a licensed pro repair any damage.
Should I test my well after a fire?
Yes. EPA says to test immediately after nearby changes, repairs, or changes in odor, color or taste. At a minimum test for total coliform bacteria and nitrate, and ask your health department about other tests.
Will boiling make the water safe after a fire?
It kills bacteria, but it does not remove nitrate or other dissolved substances. Use bottled water and test the well to find out what is in the water.
Sources
- EPA: Protect Your Home's Water
- Penn State Extension: Coliform Bacteria
- Minnesota Dept. of Health: Well Disinfection
- Minnesota Dept. of Health: Nitrate in Drinking Water
This page explains general practice for US private wells. Check your state's rules on the state pages, use a certified lab for testing, and hire a licensed well contractor for electrical or well work. See our editorial policy.
Still not sure what to do?
Ask us about your situation. A real person reads every question.
Thanks, we have your question.
We read every message and reply by email, usually within a few working days. If it is urgent (sickness, a positive E. coli test, or a flooded well), use bottled water and call your county or state health department now.

