How Marshall County stands out in Indiana
- Its deepest wells go less far than in most of Indiana: the deepest 10% start at 131 ft, 11th shallowest of 91.
- One of the most uniform well-depth patterns in Indiana: the middle half spans 62 ft to 108 ft.
- A deep driller archive: 7,792 household well records, 15th most of 91 Indiana counties.
- Wells are packed in: 1756 household well records per 100 square miles, 17th densest in Indiana.
Closest look-alike: St. Joseph County next door. Compared with it, Marshall County has fewer people estimated on high-arsenic wells (3,160 vs 5,356), higher yields (30 vs 25 gpm) and homes 5 years newer by median year built.
Closest match further away: LaGrange County elsewhere in Indiana. Next to it, Marshall County has more people estimated on high-arsenic wells (3,160 vs 1,457), lower yields (30 vs 50 gpm) and homes 9 years older by median year built.
Shallow wells in Marshall County
| Household well records | 7,792 |
|---|---|
| Median depth | 81 ft |
| Middle half of wells | 62 ft to 108 ft |
| Shallowest 10% / deepest 10% | under 50 ft / over 131 ft |
| Median static water level | 24 ft |
| Median tested yield | 30 gpm |
| Rank in Indiana (deepest = 1) | 61st of 91 |
| Deeper than this share of US counties in our data | 16% |
Most wells with a recorded depth fall under 100 ft (68%). Only 0% reach 500 ft or more.
Between the median water level and the median depth sit about 57 ft of water, roughly 84 gallons in a 6-inch casing.
Wells here are productive, with a median tested yield of 30 gallons per minute, more than in about 87% of Indiana counties.
Arsenic in Marshall County wells
Public sampling data for Marshall County is thin (fewer than 10 wells with recent results), so the arsenic model below is the best county-level guide.
Arsenic estimate
Arsenic is a bigger issue than in most of Indiana: USGS estimates about 3,160 people here (range 2,251 to 4,360) use household wells above 10 µg/L. USGS model estimate.
What to test for in Marshall County
- Coliform bacteria and nitrate every year; 68% of wells here are under 100 ft deep.
- Arsenic: USGS estimates about 3,160 people here drink from household wells above the 10 µg/L limit.
Marshall County next to its neighbours
Only 1 of 6 neighbouring counties with records have a deeper median well; nearby medians span from Elkhart County (61 ft) to Kosciusko County (85 ft).
| County | Median depth | Water level | Yield | People on high-arsenic wells (est.) |
|---|---|---|---|---|
| Marshall County | 81 ft | 24 ft | 30 gpm | 3,160 |
| Kosciusko County | 85 ft | 18 ft | 40 gpm | 8,677 |
| Fulton County | 80 ft | 18 ft | 35 gpm | 469 |
| St. Joseph County | 80 ft | 26 ft | 25 gpm | 5,356 |
| Pulaski County | 76 ft | 12 ft | 32 gpm | 1,690 |
| Starke County | 67 ft | 10 ft | 30 gpm | 3,737 |
| Elkhart County | 61 ft | 18 ft | 35 gpm | 2,680 |
Neighbours: Census county adjacency 2024.
New wells in Marshall County are going deeper
Wells completed since 2010 are somewhat deeper (median 93 ft) than those drilled before 1990 (74 ft). The 1990s were the busiest decade, with 2,063 new household wells on record. Only 2% of dated records are from 2010 or later, so most wells in service are older.
A 81 ft well is cheap to drill
Shallow wells keep drilling costs down. At $25 to $65 a foot (Angi 2026 cost guide), reaching Marshall County's median of 81 ft costs about $2,000 to $5,300 for the hole itself.
That is small next to local house prices: under 3% of the median home value of $204,900 (Census ACS 2020–2024).
With a typical water level of 24 ft, homes here use either a deep-well jet pump or a submersible, depending on yield. Price the pump separately from drilling.
What lies beneath Marshall County
Most of Marshall County (86%) lies outside any USGS principal aquifer, so wells draw on smaller, local water-bearing rock; the rest is over the Silurian-Devonian aquifers.
Uppermost principal aquifer: USGS Principal Aquifers map, sampled across the county on a grid. A well can draw from a deeper or local aquifer instead.
Buying a home with a well in Marshall County
- The median home here was built in 1973. Ask the seller for the well log, or look it up in the state well records.
- A well between 62 ft and 108 ft is normal for Marshall County. Much shallower than 62 ft deserves a careful water test.
- A flow test should be routine; county wells are productive, with a median of 30 gallons per minute.
- Book a well inspection as well as a water test; they check different things.
Help in Indiana
For Marshall County well owners: Purdue University Extension, free or low-cost testing, and all Indiana well rules and data.
Questions about wells in Marshall County
How deep are wells in Marshall County, Indiana?
81 ft is the median across 7,792 household well records; the middle half are 62 ft to 108 ft.
How much water does a Marshall County well produce?
The median tested yield is 30 gallons per minute, high for the state.
Is well water safe to drink in Marshall County?
Arsenic is the main known risk, with about 3,160 people estimated on high-arsenic wells. Only a certified lab test of your own well can say.
Are wells in Marshall County deeper than elsewhere in Indiana?
No, they are shallower: Marshall County ranks deeper than about 33% of Indiana counties in our data, and deeper than 16% of US counties we cover.
Data for Marshall County
7,792 household well records, dated from the 1950s to the 2010s, from the state well records (source); homes and population from Census ACS 2020–2024. How we filter the records. Download Marshall County as JSON (CC BY 4.0).
