How Parke County stands out in Indiana
- A high share of owner-occupied homes (82%), 9th highest in our Indiana set.
- One of the less populous counties we cover in Indiana, with about 16,406 residents (14th smallest of 91).
- Lower-priced homes: a median owner-occupied value of $151,200, 17th lowest among 91 Indiana counties here.
Closest look-alike: Vermillion County next door. Compared with it, Parke County has more people estimated on high-arsenic wells (271 vs 116), homes 10 years newer by median year built and median home values $38,100 higher.
Closest match further away: Warren County elsewhere in Indiana. Next to it, Parke County has fewer people estimated on high-arsenic wells (271 vs 533), lower yields (10 vs 15 gpm) and median home values $31,300 lower.
Wells in Parke County run deeper than most of Indiana
| Household well records | 2,102 |
|---|---|
| Median depth | 130 ft |
| Middle half of wells | 95 ft to 174 ft |
| Shallowest 10% / deepest 10% | under 66 ft / over 225 ft |
| Median static water level | 45 ft |
| Median tested yield | 10 gpm |
| Rank in Indiana (deepest = 1) | 13th of 91 |
| Deeper than this share of US counties in our data | 42% |
Most wells with a recorded depth fall 100 to 300 ft (70%).
Between the median water level and the median depth sit about 85 ft of water, roughly 125 gallons in a 6-inch casing.
The median tested yield is 10 gallons per minute.
Parke County next to its neighbours
Only 1 of 6 neighbouring counties with records have a deeper median well; nearby medians span from Vigo County (63 ft) to Clay County (158 ft).
| County | Median depth | Water level | Yield | People on high-arsenic wells (est.) |
|---|---|---|---|---|
| Parke County | 130 ft | 45 ft | 10 gpm | 271 |
| Clay County | 158 ft | 30 ft | 7 gpm | 321 |
| Vermillion County | 128 ft | 35 ft | 10 gpm | 116 |
| Fountain County | 110 ft | 29 ft | 12 gpm | 623 |
| Putnam County | 101 ft | 25 ft | 10 gpm | 298 |
| Montgomery County | 81 ft | 24 ft | 10 gpm | 1,325 |
| Vigo County | 63 ft | 26 ft | 10 gpm | 647 |
Neighbours: Census county adjacency 2024.
What drilling to 130 ft costs in Parke County
Using $25 to $65 per foot for drilling only (Angi 2026 cost guide), a well at the median depth of 130 ft runs about $3,200 to $8,400.
Against a median home value of $151,200 (Census ACS 2020–2024), a new well at that depth is about 2% to 6% of a house's worth, before equipment.
With a typical water level of 45 ft, homes here use either a deep-well jet pump or a submersible, depending on yield. Price the pump separately from drilling.
Water quality in Parke County
Public sampling data for Parke County is thin (fewer than 10 wells with recent results), so the arsenic model below is the best county-level guide.
Arsenic estimate
The USGS arsenic model puts about 271 Parke County residents (range 219 to 336) on household wells above 10 µg/L, lower than most Indiana counties. That is more than in about 39% of Indiana counties. USGS model estimate.
What to test for in Parke County
- Coliform bacteria and nitrate once a year, the EPA baseline for any private well.
- Arsenic: USGS estimates about 271 people here drink from household wells above the 10 µg/L limit.
What lies beneath Parke County
Most of Parke County (99%) lies outside any USGS principal aquifer, so wells draw on smaller, local water-bearing rock; the rest is over the Mississippian aquifers.
Uppermost principal aquifer: USGS Principal Aquifers map, sampled across the county on a grid. A well can draw from a deeper or local aquifer instead.
Drilling over the decades in Parke County
Depths have barely changed over time: 127 ft for wells before 1990 and 124 ft since 2010. The 1990s were the busiest decade, with 492 new household wells on record. Only 3% of dated records are from 2010 or later, so most wells in service are older.
Buying a home with a well in Parke County
- The median home here was built in 1972. Ask the seller for the well log, or look it up in the state well records.
- A well between 95 ft and 174 ft is normal for Parke County. Much shallower than 95 ft deserves a careful water test.
- Ask for a flow or yield test and compare it with the county median of 10 gallons per minute.
- Book a well inspection as well as a water test; they check different things.
Help in Indiana
For Parke County well owners: Purdue University Extension, free or low-cost testing, and all Indiana well rules and data.
Questions about wells in Parke County
What is the average well depth in Parke County, Indiana?
130 ft is the median across 2,102 household well records; the middle half are 95 ft to 174 ft.
How far down is the water in Parke County wells?
Driller logs put the median static water level at 45 ft below ground.
Are wells in Parke County deeper than elsewhere in Indiana?
Yes: Parke County ranks deeper than about 86% of Indiana counties in our data, and deeper than 42% of US counties we cover.
What would a new well in Parke County cost to drill?
Roughly $3,200 to $8,400 for the drilling at the median depth of 130 ft, before the pump and pressure tank.
Data for Parke County
2,102 household well records, dated from the 1960s to the 2010s, from the state well records (source); homes and population from Census ACS 2020–2024. How we filter the records. Download Parke County as JSON (CC BY 4.0).
