How Polk County stands out in Iowa
- The most populous counties we cover in Iowa, with about 503,175 residents.
- Wells are packed in: 223 household well records per 100 square miles, 2nd densest in Iowa.
- One of the most uniform well-depth patterns in Iowa: the middle half spans 175 ft to 200 ft.
- A deep driller archive: 1,276 household well records, 4th most of 91 Iowa counties.
Closest look-alike: Story County next door. Compared with it, Polk County has fewer people estimated on high-arsenic wells (432 vs 844).
Closest match further away: Cedar County elsewhere in Iowa. Next to it, Polk County has homes 17 years newer by median year built, median home values $50,800 higher and more people estimated on high-arsenic wells (432 vs 425).
Iron is the one to test for in Polk County
Iron stands out in measured groundwater: 47% of 19 sampled wells were over the EPA SMCL.
| Substance | Wells tested | Over limit | Median | Limit used | Years |
|---|---|---|---|---|---|
| Arsenic | 13 | 0% | 1 µg/L | EPA MCL | 2002 to 2017 |
| Nitrate (as N) | 18 | 0% | 0.2 mg/L as N | EPA MCL | 1990 to 2017 |
| Manganese | 19 | 32% | 0.17 mg/L | EPA lifetime health advisory | 1990 to 2017 |
| Iron | 19 | 47% | 0.21 mg/L | EPA SMCL | 1990 to 2017 |
| Fluoride | 19 | 0% | 0.3 mg/L | EPA MCL | 1990 to 2017 |
| Lead | 13 | 0% | 0.094 µg/L | EPA action level | 2002 to 2017 |
| Hardness | 13 | no data | 360 mg/L as CaCO3 | over 180 mg/L is very hard | 1990 to 2017 |
Latest result per well since 1990, Water Quality Portal; 114 results across 7 substances.
Arsenic estimate
About 432 people in Polk County (range 351 to 533) are estimated by USGS to be on household wells above the 10 µg/L arsenic limit, a middling figure for Iowa. That is more than in about 68% of Iowa counties. USGS model estimate.
What to test for in Polk County
- Coliform bacteria and nitrate once a year, the EPA baseline for any private well.
- Arsenic: USGS estimates about 432 people here drink from household wells above the 10 µg/L limit.
- Iron: 47% of sampled wells here were over the EPA SMCL.
- Manganese: 32% of sampled wells here were over the EPA lifetime health advisory.
- Hardness if you are thinking about a softener (sampled median 360 mg/L).
Got results already? Check them with our result interpreter.
Wells in Polk County run deeper than most of Iowa
| Household well records | 1,276 |
|---|---|
| Median depth | 200 ft |
| Middle half of wells | 175 ft to 200 ft |
| Shallowest 10% / deepest 10% | under 98 ft / over 300 ft |
| Rank in Iowa (deepest = 1) | 30th of 91 |
| Deeper than this share of US counties in our data | 69% |
Most wells with a recorded depth fall 100 to 300 ft (76%). Only 4% reach 500 ft or more.
Polk County has deeper wells than every neighbour
None of its 7 neighbours with records has a deeper median well. The neighbours range from Jasper County (142 ft) to Boone County (200 ft).
| County | Median depth | Water level | Yield | People on high-arsenic wells (est.) |
|---|---|---|---|---|
| Polk County | 200 ft | no data | no data | 432 |
| Boone County | 200 ft | no data | no data | 1,532 |
| Dallas County | 200 ft | no data | no data | 967 |
| Story County | 200 ft | no data | no data | 844 |
| Warren County | 200 ft | no data | no data | 625 |
| Marion County | 180 ft | no data | no data | 253 |
| Madison County | 175 ft | no data | no data | 333 |
| Jasper County | 142 ft | no data | no data | 205 |
Neighbours: Census county adjacency 2024.
Drilling a 200 ft well in Polk County
Half of all wells here go past 200 ft, so expect a bigger drilling bill: 200 ft at $25 to $65 a foot (Angi 2026 cost guide) is about $5,000 to $13,000.
That is small next to local house prices: under 5% of the median home value of $262,100 (Census ACS 2020–2024).
Equipment and permits come on top; our guide to drilling quotes shows what to ask Iowa drillers to itemize.
What lies beneath Polk County
Most of Polk County (100%) lies outside any USGS principal aquifer, so wells draw on smaller, local water-bearing rock.
Uppermost principal aquifer: USGS Principal Aquifers map, sampled across the county on a grid. A well can draw from a deeper or local aquifer instead.
Drilling over the decades in Polk County
Much of the drilling is recent: the busiest decade was the 2010s, with 641 household wells logged. 62% of dated records are from 2010 or later, a sign of steady new drilling.
Buying a home with a well in Polk County
- The median home here was built in 1982. Ask the seller for the well log, or look it up in the state well records.
- A well between 175 ft and 200 ft is normal for Polk County. Much shallower than 175 ft deserves a careful water test.
- Make sure the water test includes iron; 47% of sampled local wells were over its limit.
- Book a well inspection as well as a water test; they check different things.
Help in Iowa
For Polk County well owners: Iowa Department of Natural Resources, Private Well Program, certified labs in Iowa, free or low-cost testing, and all Iowa well rules and data.
Questions about wells in Polk County
What is the average well depth in Polk County, Iowa?
Usually close to 200 ft. Half of the 1,276 recorded wells are between 175 ft and 200 ft.
Is well water safe to drink in Polk County?
Iron stands out in measured groundwater: 47% of 19 sampled wells were over the EPA SMCL. Arsenic is the main known risk, with about 432 people estimated on high-arsenic wells.
Are wells in Polk County deeper than elsewhere in Iowa?
Yes: Polk County ranks deeper than about 67% of Iowa counties in our data, and deeper than 69% of US counties we cover.
What would a new well in Polk County cost to drill?
Roughly $5,000 to $13,000 for the drilling at the median depth of 200 ft, before the pump and pressure tank.
Data for Polk County
1,276 household well records, dated from the 2000s to the 2020s, from the state well records (source); homes and population from Census ACS 2020–2024. How we filter the records. Download Polk County as JSON (CC BY 4.0).
