How Hillsdale County stands out in Michigan
- Very little surface water: lakes and rivers cover 1% of the county, one of the lowest shares in Michigan.
- One of the most uniform well-depth patterns in Michigan: the middle half spans 62 ft to 114 ft.
- Its deepest wells go less far than in most of Michigan: the deepest 10% start at 150 ft, 14th shallowest of 83.
Closest look-alike: Calhoun County next door. Compared with it, Hillsdale County has fewer people estimated on high-arsenic wells (1,766 vs 2,743), homes 10 years newer by median year built and wells about 15 ft shallower at the median.
Closest match further away: Ottawa County elsewhere in Michigan. Next to it, Hillsdale County has homes 17 years older by median year built, median home values $147,300 lower and fewer people estimated on high-arsenic wells (1,766 vs 3,052).
Iron is the one to test for in Hillsdale County
Iron stands out in measured groundwater: 58% of 12 sampled wells were over the EPA SMCL.
| Substance | Wells tested | Over limit | Median | Limit used | Years |
|---|---|---|---|---|---|
| Nitrate (as N) | 13 | 8% | 0.025 mg/L as N | EPA MCL | 1991 to 2016 |
| Manganese | 12 | 17% | 0.05835 mg/L | EPA lifetime health advisory | 1998 to 2016 |
| Iron | 12 | 58% | 1.065 mg/L | EPA SMCL | 1998 to 2016 |
| Fluoride | 12 | 0% | 0.285 mg/L | EPA MCL | 1998 to 2016 |
| Hardness | 12 | no data | 353 mg/L as CaCO3 | over 180 mg/L is very hard | 1998 to 2016 |
Latest result per well since 1990, Water Quality Portal; 61 results across 5 substances.
Arsenic estimate
About 1,766 people in Hillsdale County (range 1,435 to 2,180) are estimated by USGS to be on household wells above the 10 µg/L arsenic limit, a middling figure for Michigan. That is more than in about 59% of Michigan counties. USGS model estimate.
What to test for in Hillsdale County
- Coliform bacteria and nitrate every year; 64% of wells here are under 100 ft deep.
- Arsenic: USGS estimates about 1,766 people here drink from household wells above the 10 µg/L limit.
- Iron: 58% of sampled wells here were over the EPA SMCL.
- Manganese: 17% of sampled wells here were over the EPA lifetime health advisory.
- Hardness if you are thinking about a softener (sampled median 353 mg/L).
Got results already? Check them with our result interpreter.
How deep wells go in Hillsdale County
| Household well records | 11,632 |
|---|---|
| Median depth | 85 ft |
| Middle half of wells | 62 ft to 114 ft |
| Shallowest 10% / deepest 10% | under 46 ft / over 150 ft |
| Median static water level | 28 ft |
| Median tested yield | 30 gpm |
| Rank in Michigan (deepest = 1) | 48th of 83 |
| Deeper than this share of US counties in our data | 18% |
Most wells with a recorded depth fall under 100 ft (64%).
Between the median water level and the median depth sit about 57 ft of water, roughly 84 gallons in a 6-inch casing.
Wells here are productive, with a median tested yield of 30 gallons per minute, more than in about 89% of Michigan counties.
A 85 ft well is cheap to drill
Shallow wells keep drilling costs down. At $25 to $65 a foot (Angi 2026 cost guide), reaching Hillsdale County's median of 85 ft costs about $2,100 to $5,500 for the hole itself.
That is small next to local house prices: under 3% of the median home value of $176,100 (Census ACS 2020–2024).
With a typical water level of 28 ft, homes here use either a deep-well jet pump or a submersible, depending on yield. Price the pump separately from drilling.
What lies beneath Hillsdale County
Most of Hillsdale County (83%) lies outside any USGS principal aquifer, so wells draw on smaller, local water-bearing rock; the rest is over the Marshall aquifer.
Uppermost principal aquifer: USGS Principal Aquifers map, sampled across the county on a grid. A well can draw from a deeper or local aquifer instead.
Drilling over the decades in Hillsdale County
Depths have barely changed over time: 80 ft for wells before 1990 and 85 ft since 2010. The 1990s were the busiest decade, with 3,058 new household wells on record.
Buying a home with a well in Hillsdale County
- The median home here was built in 1971. Ask the seller for the well log, or look it up in Michigan EGLE Wellogic water wells.
- A well between 62 ft and 114 ft is normal for Hillsdale County. Much shallower than 62 ft deserves a careful water test.
- A flow test should be routine; county wells are productive, with a median of 30 gallons per minute.
- Make sure the water test includes iron; 58% of sampled local wells were over its limit.
Hillsdale County next to its neighbours
4 of 7 neighbouring counties with records drill deeper. Medians nearby run from Branch County (58 ft) to Jackson County (114 ft).
| County | Median depth | Water level | Yield | People on high-arsenic wells (est.) |
|---|---|---|---|---|
| Hillsdale County | 85 ft | 28 ft | 30 gpm | 1,766 |
| Jackson County | 114 ft | 25 ft | 30 gpm | 3,418 |
| Fulton County, OH | 104 ft | 29 ft | 7 gpm | 7,840 |
| Calhoun County | 100 ft | 26 ft | 30 gpm | 2,743 |
| Williams County, OH | 99 ft | 28 ft | 45 gpm | 4,417 |
| Lenawee County | 85 ft | 25 ft | 15 gpm | 6,064 |
| Steuben County, IN | 84 ft | 28 ft | 14 gpm | 1,509 |
| Branch County | 58 ft | 14 ft | 25 gpm | 1,773 |
Neighbours: Census county adjacency 2024.
Help in Michigan
For Hillsdale County well owners: Michigan Department of Environment, Great Lakes, and Energy (EGLE), with MDHHS Care for MI Drinking Water, certified labs in Michigan, free or low-cost testing, and all Michigan well rules and data.
Questions about wells in Hillsdale County
How deep are wells in Hillsdale County, Michigan?
85 ft is the median across 11,632 household well records; the middle half are 62 ft to 114 ft.
Is well water safe to drink in Hillsdale County?
Iron stands out in measured groundwater: 58% of 12 sampled wells were over the EPA SMCL. Arsenic is the main known risk, with about 1,766 people estimated on high-arsenic wells.
How much water does a Hillsdale County well produce?
The median tested yield is 30 gallons per minute, high for the state.
How far down is the water in Hillsdale County wells?
Driller logs put the median static water level at 28 ft below ground.
Data for Hillsdale County
11,632 household well records, dated from the 1960s to the 2020s, from Michigan EGLE Wellogic water wells (source); homes and population from Census ACS 2020–2024. How we filter the records. Download Hillsdale County as JSON (CC BY 4.0).
