How Kent County stands out in Michigan
- A deep driller archive: 50,064 household well records, 3rd most of 83 Michigan counties.
- One of the more populous counties we cover in Michigan, with about 663,150 residents (4th largest of 83).
- Wells are packed in: 5897 household well records per 100 square miles, 4th densest in Michigan.
- A low share of owner-occupied homes (70%), 7th lowest in our Michigan set.
Closest look-alike: Barry County next door. Compared with it, Kent County has more people estimated on high-arsenic wells (5,442 vs 1,748), water standing 6 ft further down and wells about 7 ft deeper at the median.
Closest match further away: Berrien County elsewhere in Michigan. Next to it, Kent County has more people estimated on high-arsenic wells (5,442 vs 1,648), homes 11 years newer by median year built and median home values $65,600 higher.
Arsenic in Kent County wells
Public sampling data for Kent County is thin (fewer than 10 wells with recent results), so the arsenic model below is the best county-level guide.
Arsenic estimate
Arsenic is a bigger issue than in most of Michigan: USGS estimates about 5,442 people here (range 4,440 to 6,746) use household wells above 10 µg/L. USGS model estimate.
What to test for in Kent County
- Coliform bacteria and nitrate every year; 58% of wells here are under 100 ft deep.
- Arsenic: USGS estimates about 5,442 people here drink from household wells above the 10 µg/L limit.
How deep wells go in Kent County
| Household well records | 50,064 |
|---|---|
| Median depth | 87 ft |
| Middle half of wells | 60 ft to 130 ft |
| Shallowest 10% / deepest 10% | under 44 ft / over 180 ft |
| Median static water level | 36 ft |
| Median tested yield | 35 gpm |
| Rank in Michigan (deepest = 1) | 45th of 83 |
| Deeper than this share of US counties in our data | 19% |
Most wells with a recorded depth fall under 100 ft (58%).
Between the median water level and the median depth sit about 51 ft of water, roughly 75 gallons in a 6-inch casing.
Wells here are productive, with a median tested yield of 35 gallons per minute, more than in about 93% of Michigan counties.
Kent County and the Pennsylvanian aquifers
Most of Kent County (59%) lies outside any USGS principal aquifer, so wells draw on smaller, local water-bearing rock; the rest is over the Pennsylvanian aquifers. Among the 97 counties in our data that sit mainly over the same aquifer (across 5 states), Kent County's median well of 87 ft is shallower than most: deeper than about 21% of them.
Uppermost principal aquifer: USGS Principal Aquifers map, sampled across the county on a grid. A well can draw from a deeper or local aquifer instead.
Kent County next to its neighbours
Only 1 of 7 neighbouring counties with records have a deeper median well; nearby medians span from Muskegon County (47 ft) to Ionia County (106 ft).
| County | Median depth | Water level | Yield | People on high-arsenic wells (est.) |
|---|---|---|---|---|
| Kent County | 87 ft | 36 ft | 35 gpm | 5,442 |
| Ionia County | 106 ft | 33 ft | 30 gpm | 1,488 |
| Ottawa County | 86 ft | 28 ft | 30 gpm | 3,052 |
| Allegan County | 80 ft | 28 ft | 30 gpm | 3,677 |
| Barry County | 80 ft | 30 ft | 35 gpm | 1,748 |
| Newaygo County | 72 ft | 28 ft | 25 gpm | 1,710 |
| Montcalm County | 70 ft | 20 ft | 30 gpm | 2,338 |
| Muskegon County | 47 ft | 17 ft | 25 gpm | 3,036 |
Neighbours: Census county adjacency 2024.
New wells in Kent County are going deeper
Wells completed since 2010 are somewhat deeper (median 100 ft) than those drilled before 1990 (77 ft). The 1990s were the busiest decade, with 12,287 new household wells on record.
A 87 ft well is cheap to drill
Shallow wells keep drilling costs down. At $25 to $65 a foot (Angi 2026 cost guide), reaching Kent County's median of 87 ft costs about $2,200 to $5,700 for the hole itself.
That is small next to local house prices: under 2% of the median home value of $289,900 (Census ACS 2020–2024).
With a typical water level of 36 ft, homes here use either a deep-well jet pump or a submersible, depending on yield. Price the pump separately from drilling.
Buying a home with a well in Kent County
- The median home here was built in 1977. Ask the seller for the well log, or look it up in Michigan EGLE Wellogic water wells.
- A well between 60 ft and 130 ft is normal for Kent County. Much shallower than 60 ft deserves a careful water test.
- A flow test should be routine; county wells are productive, with a median of 35 gallons per minute.
- Book a well inspection as well as a water test; they check different things.
Help in Michigan
For Kent County well owners: Michigan Department of Environment, Great Lakes, and Energy (EGLE), with MDHHS Care for MI Drinking Water, certified labs in Michigan, free or low-cost testing, and all Michigan well rules and data.
Questions about wells in Kent County
How deep are wells in Kent County, Michigan?
87 ft is the median across 50,064 household well records; the middle half are 60 ft to 130 ft.
How much water does a Kent County well produce?
The median tested yield is 35 gallons per minute, high for the state.
Is well water safe to drink in Kent County?
Arsenic is the main known risk, with about 5,442 people estimated on high-arsenic wells. Only a certified lab test of your own well can say.
How far down is the water in Kent County wells?
Driller logs put the median static water level at 36 ft below ground.
Data for Kent County
50,064 household well records, dated from the 1960s to the 2020s, from Michigan EGLE Wellogic water wells (source); homes and population from Census ACS 2020–2024. How we filter the records. Download Kent County as JSON (CC BY 4.0).
