How Pope County stands out in Minnesota
- A high share of owner-occupied homes (84%), 10th highest in our Minnesota set.
- Unusually wet: lakes and rivers cover 6% of the county, the 21st highest share in Minnesota.
- One of the less populous counties we cover in Minnesota, with about 11,418 residents (24th smallest of 87).
Closest look-alike: Kandiyohi County next door. Compared with it, Pope County has fewer people estimated on high-arsenic wells (334 vs 1,166), homes 7 years older by median year built and wells about 1 ft deeper at the median.
Closest match further away: Isanti County elsewhere in Minnesota. Next to it, Pope County has fewer people estimated on high-arsenic wells (334 vs 1,346), homes 17 years older by median year built and median home values $51,100 lower.
Iron is the one to test for in Pope County
Iron stands out in measured groundwater: 93% of 82 sampled wells were over the EPA SMCL.
| Substance | Wells tested | Over limit | Median | Limit used | Years |
|---|---|---|---|---|---|
| Arsenic | 80 | 49% | 8.94 µg/L | EPA MCL | 1994 to 2004 |
| Nitrate (as N) | 108 | 13% | 0.00435 mg/L as N | EPA MCL | 1994 to 2025 |
| Manganese | 80 | 19% | 0.19 mg/L | EPA lifetime health advisory | 1994 to 2005 |
| Iron | 82 | 93% | 2.175 mg/L | EPA SMCL | 1994 to 2006 |
| Fluoride | 82 | 0% | 0.18 mg/L | EPA MCL | 1994 to 2005 |
| Lead | 76 | 3% | 0.15 µg/L | EPA action level | 1994 to 2004 |
Latest result per well since 1990, Water Quality Portal; 508 results across 6 substances.
Arsenic estimate
The USGS arsenic model puts about 334 Pope County residents (range 272 to 413) on household wells above 10 µg/L, lower than most Minnesota counties. That is more than in about 34% of Minnesota counties. USGS model estimate.
What to test for in Pope County
- Coliform bacteria and nitrate once a year, the EPA baseline for any private well.
- Arsenic: USGS estimates about 334 people here drink from household wells above the 10 µg/L limit.
- Iron: 93% of sampled wells here were over the EPA SMCL.
- Manganese: 19% of sampled wells here were over the EPA lifetime health advisory.
Got results already? Check them with our result interpreter.
Wells in Pope County are shallower than most of Minnesota
| Household well records | 4,229 |
|---|---|
| Median depth | 104 ft |
| Middle half of wells | 72 ft to 144 ft |
| Shallowest 10% / deepest 10% | under 54 ft / over 210 ft |
| Median static water level | 25 ft |
| Median tested yield | 30 gpm |
| Rank in Minnesota (deepest = 1) | 61st of 87 |
| Deeper than this share of US counties in our data | 29% |
Most wells with a recorded depth fall 100 to 300 ft (51%).
Between the median water level and the median depth sit about 79 ft of water, roughly 116 gallons in a 6-inch casing.
Wells here are productive, with a median tested yield of 30 gallons per minute, more than in about 82% of Minnesota counties.
What drilling to 104 ft costs in Pope County
Using $25 to $65 per foot for drilling only (Angi 2026 cost guide), a well at the median depth of 104 ft runs about $2,600 to $6,800.
That is small next to local house prices: under 3% of the median home value of $255,100 (Census ACS 2020–2024).
With a typical water level of 25 ft, homes here use either a deep-well jet pump or a submersible, depending on yield. Price the pump separately from drilling.
What lies beneath Pope County
Most of Pope County (77%) lies outside any USGS principal aquifer, so wells draw on smaller, local water-bearing rock; the rest is over the Lower Cretaceous aquifers.
Uppermost principal aquifer: USGS Principal Aquifers map, sampled across the county on a grid. A well can draw from a deeper or local aquifer instead.
Drilling over the decades in Pope County
Depths have barely changed over time: 104 ft for wells before 1990 and 107 ft since 2010. Much of the drilling is recent: the busiest decade was the 2000s, with 1,533 household wells logged.
Buying a home with a well in Pope County
- The median home here was built in 1971. Ask the seller for the well log, or look it up in Minnesota County Well Index (MGS/MDH), non-public-supply wells.
- A well between 72 ft and 144 ft is normal for Pope County. Much shallower than 72 ft deserves a careful water test.
- A flow test should be routine; county wells are productive, with a median of 30 gallons per minute.
- Make sure the water test includes iron; 93% of sampled local wells were over its limit.
Pope County next to its neighbours
3 of 6 neighbouring counties with records drill deeper. Medians nearby run from Stearns County (72 ft) to Stevens County (124 ft).
| County | Median depth | Water level | Yield | People on high-arsenic wells (est.) |
|---|---|---|---|---|
| Pope County | 104 ft | 25 ft | 30 gpm | 334 |
| Stevens County | 124 ft | 50 ft | 30 gpm | 187 |
| Swift County | 108 ft | 22 ft | 30 gpm | 176 |
| Grant County | 105 ft | 30 ft | 40 gpm | 129 |
| Kandiyohi County | 103 ft | 25 ft | 30 gpm | 1,166 |
| Douglas County | 100 ft | 26 ft | 50 gpm | 1,252 |
| Stearns County | 72 ft | 22 ft | 20 gpm | 1,218 |
Neighbours: Census county adjacency 2024.
Help in Minnesota
For Pope County well owners: Minnesota Department of Health, Well Management Section, certified labs in Minnesota, free or low-cost testing, and all Minnesota well rules and data.
Questions about wells in Pope County
What is the average well depth in Pope County, Minnesota?
104 ft is the median across 4,229 household well records; the middle half are 72 ft to 144 ft.
Is well water safe to drink in Pope County?
Iron stands out in measured groundwater: 93% of 82 sampled wells were over the EPA SMCL. Arsenic is the main known risk, with about 334 people estimated on high-arsenic wells.
How much water does a Pope County well produce?
The median tested yield is 30 gallons per minute, high for the state.
Are wells in Pope County deeper than elsewhere in Minnesota?
No, they are shallower: Pope County ranks deeper than about 30% of Minnesota counties in our data, and deeper than 29% of US counties we cover.
Data for Pope County
4,229 household well records, dated from the 1950s to the 2020s, from Minnesota County Well Index (MGS/MDH), non-public-supply wells (source); homes and population from Census ACS 2020–2024. How we filter the records. Download Pope County as JSON (CC BY 4.0).
