Ask a question
130 ftmedian well depth20th deepest of 41 in ND
478household well recordsState well records
96people est. on high-arsenic wellsUSGS model
1972median year homes builtCensus ACS
At a glanceThe county has 478 household well records on file, enough for stable medians. Manganese stands out in measured groundwater: 65% of 20 sampled wells were over the EPA lifetime health advisory. Most of Richland County (93%) lies outside any USGS principal aquifer, so wells draw on smaller, local water-bearing rock; the rest is over the Lower Cretaceous aquifers. Richland County has about 16,584 residents on 1,436 square miles. Its 33 household well records per 100 square miles are among the densest in the state. It borders Cass, Ransom and Sargent counties, plus 5 counties in Minnesota, South Dakota. It lies in southeastern North Dakota.

How Richland County stands out in North Dakota

  • A deep driller archive: 478 household well records, 1st most of 41 North Dakota counties.
  • Wells are packed in: 33 household well records per 100 square miles, 2nd densest in North Dakota.
  • One of the more populous counties we cover in North Dakota, with about 16,584 residents (8th largest of 41).
  • A low share of owner-occupied homes (68%), 9th lowest in our North Dakota set.

Closest look-alike: Wilkin County, Minnesota next door. Compared with it, Richland County has fewer people estimated on high-arsenic wells (96 vs 176).

Closest match further away: Mountrail County elsewhere in North Dakota. Next to it, Richland County has homes 25 years older by median year built, more people estimated on high-arsenic wells (96 vs 58) and median home values $49,100 lower.

Manganese is the one to test for in Richland County

Manganese stands out in measured groundwater: 65% of 20 sampled wells were over the EPA lifetime health advisory.

SubstanceWells testedOver limitMedianLimit usedYears
Nitrate (as N)170%0.025 mg/L as NEPA MCL1993 to 2004
Uranium128%2.45 µg/LEPA MCL1993 to 1995
Manganese2065%0.395 mg/LEPA lifetime health advisory1993 to 2016
Iron2055%0.5735 mg/LEPA SMCL1993 to 2016
Fluoride200%0.275 mg/LEPA MCL1993 to 2016
Radon100%350 pCi/LEPA AMCL1993 to 1995
Hardness20no data349.5 mg/L as CaCO3over 180 mg/L is very hard1993 to 2016

Latest result per well since 1990, Water Quality Portal; 119 results across 7 substances.

Arsenic estimate

Arsenic is a bigger issue than in most of North Dakota: USGS estimates about 96 people here (range 78 to 117) use household wells above 10 µg/L. USGS model estimate.

What to test for in Richland County

  • Coliform bacteria and nitrate once a year, the EPA baseline for any private well.
  • Arsenic: the county estimate ranks above about 89% of North Dakota counties.
  • Manganese: 65% of sampled wells here were over the EPA lifetime health advisory.
  • Iron: 55% of sampled wells here were over the EPA SMCL.
  • Uranium: 8% of sampled wells here were over the EPA MCL.
  • Hardness if you are thinking about a softener (sampled median 350 mg/L).

Got results already? Check them with our result interpreter.

How deep wells go in Richland County

groundmiddle half of wells: 78 ft–190 ftmedian well 130 ftdeepest 10% start at 272 ft
To scale: the median Richland County household well bottoms out at 130 ft, and the deepest tenth go past 272 ft.
Household well records478
Median depth130 ft
Middle half of wells78 ft to 190 ft
Shallowest 10% / deepest 10%under 50 ft / over 272 ft
Rank in North Dakota (deepest = 1)20th of 41
Deeper than this share of US counties in our data42%

Most wells with a recorded depth fall 100 to 300 ft (58%). Only 2% reach 500 ft or more.

What drilling to 130 ft costs in Richland County

Using $25 to $65 per foot for drilling only (Angi 2026 cost guide), a well at the median depth of 130 ft runs about $3,200 to $8,400.

That is small next to local house prices: under 5% of the median home value of $183,600 (Census ACS 2020–2024).

Equipment and permits come on top; our guide to drilling quotes shows what to ask North Dakota drillers to itemize.

What lies beneath Richland County

Most of Richland County (93%) lies outside any USGS principal aquifer, so wells draw on smaller, local water-bearing rock; the rest is over the Lower Cretaceous aquifers.

Uppermost principal aquifer: USGS Principal Aquifers map, sampled across the county on a grid. A well can draw from a deeper or local aquifer instead.

Richland County next to its neighbours

Clay County, MN: median depth 137 ftTraverse County, MN: median depth 135 ftWilkin County, MN: median depth 130 ftCass County: median depth 190 ftRansom County: median depth 70 ftSargent County: median depth 152 ftMarshall County, SD: median depth 695 ftRoberts County, SD: median depth 107 ftRichland County: median depth 130 ft<50 ft50-100 ft100-200 ft200-300 ft300-500 ft500+ ft
Richland County (orange outline) with 8 neighbouring counties; darker means deeper median wells.

5 of 8 neighbouring counties with records drill deeper. Medians nearby run from Ransom County (70 ft) to Marshall County (695 ft).

CountyMedian depthWater levelYieldPeople on high-arsenic wells (est.)
Richland County130 ftno datano data96
Marshall County, SD695 ft34 ftno datanear 0
Cass County190 ftno datano data124
Sargent County152 ftno datano data13
Clay County, MN137 ft28 ft30 gpm512
Traverse County, MN135 ft19 ft15 gpm117
Wilkin County, MN130 ft10 ft25 gpm176
Roberts County, SD107 ft15 ftno data22
Ransom County70 ftno datano data36

Neighbours: Census county adjacency 2024.

Buying a home with a well in Richland County

  • The median home here was built in 1972. Ask the seller for the well log, or look it up in the state well records.
  • A well between 78 ft and 190 ft is normal for Richland County. Much shallower than 78 ft deserves a careful water test.
  • Make sure the water test includes manganese; 65% of sampled local wells were over its limit.
  • Book a well inspection as well as a water test; they check different things.

Drilling over the decades in Richland County

1970s150 ft1980s125 ft1990s120 ft

The 1980s were the busiest decade, with 156 new household wells on record. Only 0% of dated records are from 2010 or later, so most wells in service are older.

Help in North Dakota

For Richland County well owners: North Dakota Department of Environmental Quality, certified labs in North Dakota, free or low-cost testing, and all North Dakota well rules and data.

Questions about wells in Richland County

What is the average well depth in Richland County, North Dakota?

130 ft is the median across 478 household well records; the middle half are 78 ft to 190 ft.

Is well water safe to drink in Richland County?

Manganese stands out in measured groundwater: 65% of 20 sampled wells were over the EPA lifetime health advisory.

What would a new well in Richland County cost to drill?

Roughly $3,200 to $8,400 for the drilling at the median depth of 130 ft, before the pump and pressure tank.

How old are homes in Richland County?

The Census median year built for Richland County homes is 1972; it covers all homes, not only those on wells.

Data for Richland County

478 household well records, dated from the 1970s to the 1990s, from the state well records (source); homes and population from Census ACS 2020–2024. How we filter the records. Download Richland County as JSON (CC BY 4.0).

Questions about a well in Richland County?

Ask us about your situation. A real person reads every question.

This field is required.
We reply by email. We never share it without your permission.Enter an email address like name@example.com.
Describe what you are seeing and anything you have tried. Plain words are fine.Please write at least 20 characters so we can help.
Choose your state so we can point you to the right rules.
Prefer the full form?

Thanks, we have your question.

We read every message and reply by email, usually within a few working days. If it is urgent (sickness, a positive E. coli test, or a flooded well), use bottled water and call your county or state health department now.

Find your state's well program