Ask a question
175 ftmedian well depth54th deepest of 91 in IA
521household well recordsState well records
108people est. on high-arsenic wellsUSGS model
1960median year homes builtCensus ACS
At a glanceThe county has 521 household well records on file, enough for stable medians. Iron stands out in measured groundwater: 46% of 13 sampled wells were over the EPA SMCL. The median home was built in 1960, so many wells here are decades old. About 84% of Howard County is over the Upper carbonate aquifer (carbonate-rock aquifers), with 16% over the Silurian-Devonian aquifers. Howard County is a rural county of about 9,445 people spread over 473 square miles. It borders Chickasaw, Floyd, Mitchell and Winneshiek counties, plus 2 counties in Minnesota. It lies in northeastern Iowa.

How Howard County stands out in Iowa

  • Very little surface water: lakes and rivers cover under 1% of the county, one of the lowest shares in Iowa.
  • One of the less populous counties we cover in Iowa, with about 9,445 residents (16th smallest of 91).
  • Small by area: 473 square miles of land, the 23rd smallest of the 91 Iowa counties on this site.

Closest look-alike: Mitchell County next door. Compared with it, Howard County has fewer people estimated on high-arsenic wells (108 vs 143), median home values $27,300 lower and wells about 2 ft deeper at the median.

Closest match further away: Cass County elsewhere in Iowa. Next to it, Howard County has more people estimated on high-arsenic wells (108 vs 92) and homes 4 years newer by median year built.

Iron is the one to test for in Howard County

Iron stands out in measured groundwater: 46% of 13 sampled wells were over the EPA SMCL.

SubstanceWells testedOver limitMedianLimit usedYears
Arsenic110%0.5 µg/LEPA MCL2001 to 2012
Nitrate (as N)100%0.065 mg/L as NEPA MCL1991 to 2006
Manganese130%0.01 mg/LEPA lifetime health advisory1991 to 2012
Iron1346%0.03 mg/LEPA SMCL1991 to 2012
Fluoride130%0.51 mg/LEPA MCL1991 to 2012
Lead110%0.5 µg/LEPA action level2001 to 2012

Latest result per well since 1990, Water Quality Portal; 71 results across 6 substances.

Arsenic estimate

The USGS arsenic model puts about 108 Howard County residents (range 91 to 128) on household wells above 10 µg/L, lower than most Iowa counties. That is more than in about 20% of Iowa counties. USGS model estimate.

What to test for in Howard County

  • Coliform bacteria and nitrate once a year, the EPA baseline for any private well.
  • Arsenic: USGS estimates about 108 people here drink from household wells above the 10 µg/L limit.
  • Iron: 46% of sampled wells here were over the EPA SMCL.

Got results already? Check them with our result interpreter.

How deep wells go in Howard County

groundmiddle half of wells: 136 ft–250 ftmedian well 175 ftdeepest 10% start at 356 ft
To scale: the median Howard County household well bottoms out at 175 ft, and the deepest tenth go past 356 ft.
Household well records521
Median depth175 ft
Middle half of wells136 ft to 250 ft
Shallowest 10% / deepest 10%under 115 ft / over 356 ft
Rank in Iowa (deepest = 1)54th of 91
Deeper than this share of US counties in our data60%

Most wells with a recorded depth fall 100 to 300 ft (79%). Only 2% reach 500 ft or more.

What drilling to 175 ft costs in Howard County

Using $25 to $65 per foot for drilling only (Angi 2026 cost guide), a well at the median depth of 175 ft runs about $4,400 to $11,400.

Against a median home value of $147,800 (Census ACS 2020–2024), a new well at that depth is about 3% to 8% of a house's worth, before equipment.

Equipment and permits come on top; our guide to drilling quotes shows what to ask Iowa drillers to itemize.

Buying an older home with a well in Howard County

  • The median home in Howard County was built in 1960. Older homes often have older wells, so ask when the well was drilled and whether the casing, cap and pump have been replaced.
  • A well between 136 ft and 250 ft is normal for Howard County. Much shallower than 136 ft deserves a careful water test.
  • Make sure the water test includes iron; 46% of sampled local wells were over its limit.
  • Book a well inspection as well as a water test; they check different things.

Howard County and the Upper carbonate aquifer

About 84% of Howard County is over the Upper carbonate aquifer (carbonate-rock aquifers), with 16% over the Silurian-Devonian aquifers. Among the 12 counties in our data that sit mainly over the same aquifer (across 2 states), Howard County's median well of 175 ft is near the middle: deeper than about 50% of them.

Uppermost principal aquifer: USGS Principal Aquifers map, sampled across the county on a grid. A well can draw from a deeper or local aquifer instead.

Drilling over the decades in Howard County

1990s160 ft2000s172 ft2010s176 ft2020s188 ft

Much of the drilling is recent: the busiest decade was the 2010s, with 176 household wells logged. 51% of dated records are from 2010 or later, a sign of steady new drilling.

Howard County next to its neighbours

Chickasaw County: median depth 156 ftFloyd County: median depth 195 ftMitchell County: median depth 173 ftWinneshiek County: median depth 370 ftFillmore County, MN: median depth 290 ftMower County, MN: median depth 161 ftHoward County: median depth 175 ft<50 ft50-100 ft100-200 ft200-300 ft300-500 ft500+ ft
Howard County (orange outline) with 6 neighbouring counties; darker means deeper median wells.

3 of 6 neighbouring counties with records drill deeper. Medians nearby run from Chickasaw County (156 ft) to Winneshiek County (370 ft).

CountyMedian depthWater levelYieldPeople on high-arsenic wells (est.)
Howard County175 ftno datano data108
Winneshiek County370 ftno datano data151
Fillmore County, MN290 ft115 ft15 gpm202
Floyd County195 ftno datano data213
Mitchell County173 ftno datano data143
Mower County, MN161 ft34 ft30 gpm805
Chickasaw County156 ftno datano data241

Neighbours: Census county adjacency 2024.

Help in Iowa

For Howard County well owners: Iowa Department of Natural Resources, Private Well Program, certified labs in Iowa, free or low-cost testing, and all Iowa well rules and data.

Questions about wells in Howard County

What is the average well depth in Howard County, Iowa?

175 ft is the median across 521 household well records; the middle half are 136 ft to 250 ft.

Is well water safe to drink in Howard County?

Iron stands out in measured groundwater: 46% of 13 sampled wells were over the EPA SMCL. Arsenic is the main known risk, with about 108 people estimated on high-arsenic wells.

What aquifer do wells in Howard County draw from?

About 84% of Howard County is over the Upper carbonate aquifer (carbonate-rock aquifers), with 16% over the Silurian-Devonian aquifers. Your own well log names the formation your well actually taps.

How old are homes in Howard County?

The Census median year built for Howard County homes is 1960; it covers all homes, not only those on wells.

What would a new well in Howard County cost to drill?

Roughly $4,400 to $11,400 for the drilling at the median depth of 175 ft, before the pump and pressure tank.

Data for Howard County

521 household well records, dated from the 1990s to the 2020s, from the state well records (source); homes and population from Census ACS 2020–2024. How we filter the records. Download Howard County as JSON (CC BY 4.0).

Questions about a well in Howard County?

Ask us about your situation. A real person reads every question.

This field is required.
We reply by email. We never share it without your permission.Enter an email address like name@example.com.
Describe what you are seeing and anything you have tried. Plain words are fine.Please write at least 20 characters so we can help.
Choose your state so we can point you to the right rules.
Prefer the full form?

Thanks, we have your question.

We read every message and reply by email, usually within a few working days. If it is urgent (sickness, a positive E. coli test, or a flooded well), use bottled water and call your county or state health department now.

Find your state's well program