How Chickasaw County stands out in Iowa
- A high share of owner-occupied homes (81%), 13th highest in our Iowa set.
- One of the most uniform well-depth patterns in Iowa: the middle half spans 133 ft to 200 ft.
- Its deepest wells go less far than in most of Iowa: the deepest 10% start at 255 ft, 18th shallowest of 91.
Closest look-alike: Butler County next door. Compared with it, Chickasaw County has homes 8 years newer by median year built and more people estimated on high-arsenic wells (241 vs 198).
Closest match further away: Pottawattamie County elsewhere in Iowa. Next to it, Chickasaw County has fewer people estimated on high-arsenic wells (241 vs 945) and wells about 1 ft deeper at the median.
Iron is the one to test for in Chickasaw County
Iron stands out in measured groundwater: 43% of 14 sampled wells were over the EPA SMCL.
| Substance | Wells tested | Over limit | Median | Limit used | Years |
|---|---|---|---|---|---|
| Arsenic | 12 | 0% | 0.5 µg/L | EPA MCL | 2002 to 2017 |
| Nitrate (as N) | 12 | 8% | 0.0375 mg/L as N | EPA MCL | 1990 to 2017 |
| Manganese | 14 | 0% | 0.01 mg/L | EPA lifetime health advisory | 1990 to 2017 |
| Iron | 14 | 43% | 0.16 mg/L | EPA SMCL | 1990 to 2017 |
| Fluoride | 14 | 0% | 0.64 mg/L | EPA MCL | 1990 to 2017 |
| Lead | 12 | 0% | 0.023 µg/L | EPA action level | 2002 to 2017 |
Latest result per well since 1990, Water Quality Portal; 78 results across 6 substances.
Arsenic estimate
About 241 people in Chickasaw County (range 205 to 285) are estimated by USGS to be on household wells above the 10 µg/L arsenic limit, a middling figure for Iowa. That is more than in about 49% of Iowa counties. USGS model estimate.
What to test for in Chickasaw County
- Coliform bacteria and nitrate once a year, the EPA baseline for any private well.
- Arsenic: USGS estimates about 241 people here drink from household wells above the 10 µg/L limit.
- Iron: 43% of sampled wells here were over the EPA SMCL.
Got results already? Check them with our result interpreter.
Wells in Chickasaw County are shallower than most of Iowa
| Household well records | 487 |
|---|---|
| Median depth | 156 ft |
| Middle half of wells | 133 ft to 200 ft |
| Shallowest 10% / deepest 10% | under 110 ft / over 255 ft |
| Rank in Iowa (deepest = 1) | 72nd of 91 |
| Deeper than this share of US counties in our data | 53% |
Almost all wells with a recorded depth fall 100 to 300 ft (89%). Only 1% reach 500 ft or more.
Chickasaw County and the Silurian-Devonian aquifers
All or nearly all of Chickasaw County sits over the Silurian-Devonian aquifers (carbonate-rock aquifers), the uppermost principal aquifer USGS maps here. Among the 130 counties in our data that sit mainly over the same aquifer (across 7 states), Chickasaw County's median well of 156 ft is deeper than most: deeper than about 76% of them.
Uppermost principal aquifer: USGS Principal Aquifers map, sampled across the county on a grid. A well can draw from a deeper or local aquifer instead.
What drilling to 156 ft costs in Chickasaw County
Using $25 to $65 per foot for drilling only (Angi 2026 cost guide), a well at the median depth of 156 ft runs about $3,900 to $10,100.
Against a median home value of $182,600 (Census ACS 2020–2024), a new well at that depth is about 2% to 6% of a house's worth, before equipment.
Equipment and permits come on top; our guide to drilling quotes shows what to ask Iowa drillers to itemize.
Chickasaw County next to its neighbours
5 of 7 neighbouring counties with records drill deeper. Medians nearby run from Bremer County (142 ft) to Winneshiek County (370 ft).
| County | Median depth | Water level | Yield | People on high-arsenic wells (est.) |
|---|---|---|---|---|
| Chickasaw County | 156 ft | no data | no data | 241 |
| Winneshiek County | 370 ft | no data | no data | 151 |
| Floyd County | 195 ft | no data | no data | 213 |
| Fayette County | 190 ft | no data | no data | 142 |
| Howard County | 175 ft | no data | no data | 108 |
| Mitchell County | 173 ft | no data | no data | 143 |
| Butler County | 156 ft | no data | no data | 198 |
| Bremer County | 142 ft | no data | no data | 300 |
Neighbours: Census county adjacency 2024.
Buying an older home with a well in Chickasaw County
- The median home in Chickasaw County was built in 1966. Older homes often have older wells, so ask when the well was drilled and whether the casing, cap and pump have been replaced.
- A well between 133 ft and 200 ft is normal for Chickasaw County. Much shallower than 133 ft deserves a careful water test.
- Make sure the water test includes iron; 43% of sampled local wells were over its limit.
- Book a well inspection as well as a water test; they check different things.
Drilling over the decades in Chickasaw County
Much of the drilling is recent: the busiest decade was the 2010s, with 172 household wells logged. 68% of dated records are from 2010 or later, a sign of steady new drilling.
Help in Iowa
For Chickasaw County well owners: Iowa Department of Natural Resources, Private Well Program, certified labs in Iowa, free or low-cost testing, and all Iowa well rules and data.
Questions about wells in Chickasaw County
What is the average well depth in Chickasaw County, Iowa?
156 ft is the median across 487 household well records; the middle half are 133 ft to 200 ft.
Is well water safe to drink in Chickasaw County?
Iron stands out in measured groundwater: 43% of 14 sampled wells were over the EPA SMCL. Arsenic is the main known risk, with about 241 people estimated on high-arsenic wells.
What aquifer do wells in Chickasaw County draw from?
All or nearly all of Chickasaw County sits over the Silurian-Devonian aquifers (carbonate-rock aquifers), the uppermost principal aquifer USGS maps here. Your own well log names the formation your well actually taps.
Are wells in Chickasaw County deeper than elsewhere in Iowa?
No, they are shallower: Chickasaw County ranks deeper than about 21% of Iowa counties in our data, and deeper than 53% of US counties we cover.
How old are homes in Chickasaw County?
The Census median year built for Chickasaw County homes is 1966; it covers all homes, not only those on wells.
Data for Chickasaw County
487 household well records, dated from the 2000s to the 2020s, from the state well records (source); homes and population from Census ACS 2020–2024. How we filter the records. Download Chickasaw County as JSON (CC BY 4.0).
