Ask a question
156 ftmedian well depth25th deepest of 87 in MN
20,400household well recordsState well records
37people est. on high-arsenic wellsUSGS model
65 ftmedian water levelDriller-reported
At a glanceFew counties have as much driller data: the state lists 20,400 household well records here. Iron stands out in measured groundwater: 61% of 249 sampled wells were over the EPA SMCL. Static water levels are among the deeper ones in the state, with a median of 65 ft below ground. Wells here are productive, with a median tested yield of 30 gallons per minute, more than in about 82% of Minnesota counties. With about 1,269,496 residents, Hennepin County is densely settled at roughly 2,291 people per square mile. Its 3682 household well records per 100 square miles are among the densest in the state. It borders Anoka, Carver, Dakota, Ramsey, Scott, Sherburne and Wright counties. It lies in southern Minnesota. Lakes, rivers and other water cover 9% of the county's area.

How Hennepin County stands out in Minnesota

  • The most populous counties we cover in Minnesota, with about 1,269,496 residents.
  • A low share of owner-occupied homes (63%), 3rd lowest in our Minnesota set.
  • Higher-priced homes: a median owner-occupied value of $392,900, 4th highest among 87 Minnesota counties here.
  • Wells are packed in: 3682 household well records per 100 square miles, 6th densest in Minnesota.

Closest look-alike: Ramsey County next door. Compared with it, Hennepin County has more people estimated on high-arsenic wells (37 vs 0), higher yields (30 vs 20 gpm) and homes 8 years newer by median year built.

Closest match further away: Blue Earth County elsewhere in Minnesota. Next to it, Hennepin County has fewer people estimated on high-arsenic wells (37 vs 4,305), median home values $126,200 higher and homes 5 years older by median year built.

Iron is the one to test for in Hennepin County

Iron stands out in measured groundwater: 61% of 249 sampled wells were over the EPA SMCL.

SubstanceWells testedOver limitMedianLimit usedYears
Arsenic17715%2 µg/LEPA MCL1990 to 2025
Nitrate (as N)2512%0.03 mg/L as NEPA MCL1990 to 2025
Uranium280%1.61 µg/LEPA MCL1996 to 2016
Manganese22557%0.389 mg/LEPA lifetime health advisory1990 to 2025
Iron24961%0.6 mg/LEPA SMCL1990 to 2025
Fluoride2180%0.18 mg/LEPA MCL1990 to 2025
Lead1566%0.05 µg/LEPA action level1990 to 2025
Radon180%260 pCi/LEPA AMCL1996 to 1997
Hardness88no data408 mg/L as CaCO3over 180 mg/L is very hard1990 to 2016
PFOA2544%3.09 ng/LEPA MCL2006 to 2025
PFOS2556%4.26 ng/LEPA MCL2006 to 2025

Latest result per well since 1990, Water Quality Portal; 1,460 results across 11 substances.

Arsenic estimate

The USGS arsenic model puts about 37 Hennepin County residents (range 29 to 48) on household wells above 10 µg/L, lower than most Minnesota counties. That is more than in about 8% of Minnesota counties. USGS model estimate.

What to test for in Hennepin County

  • Coliform bacteria and nitrate once a year, the EPA baseline for any private well.
  • Arsenic at least once; the county estimate is low, but single wells vary.
  • Iron: 61% of sampled wells here were over the EPA SMCL.
  • Manganese: 57% of sampled wells here were over the EPA lifetime health advisory.
  • PFOS: 56% of sampled wells here were over the EPA MCL.
  • PFOA: 44% of sampled wells here were over the EPA MCL.

Got results already? Check them with our result interpreter.

Wells in Hennepin County run deeper than most of Minnesota

groundmiddle half of wells: 115 ft–208 ftwater level 65 ftmedian well 156 ftdeepest 10% start at 265 ft
To scale: ground, the median water level at 65 ft and the median well bottom at 156 ft in Hennepin County.
Household well records20,400
Median depth156 ft
Middle half of wells115 ft to 208 ft
Shallowest 10% / deepest 10%under 86 ft / over 265 ft
Median static water level65 ft
Median tested yield30 gpm
Rank in Minnesota (deepest = 1)25th of 87
Deeper than this share of US counties in our data53%

Most wells with a recorded depth fall 100 to 300 ft (78%). Only 0% reach 500 ft or more.

Between the median water level and the median depth sit about 91 ft of water, roughly 134 gallons in a 6-inch casing.

Wells here are productive, with a median tested yield of 30 gallons per minute, more than in about 82% of Minnesota counties.

Hennepin County and the Cambrian-Ordovician aquifer system

About 58% of Hennepin County is over the Cambrian-Ordovician aquifer system (sandstone aquifers), with 42% over rock outside any principal aquifer. Among the 78 counties in our data that sit mainly over the same aquifer (across 5 states), Hennepin County's median well of 156 ft is near the middle: deeper than about 58% of them.

Uppermost principal aquifer: USGS Principal Aquifers map, sampled across the county on a grid. A well can draw from a deeper or local aquifer instead.

What drilling to 156 ft costs in Hennepin County

Using $25 to $65 per foot for drilling only (Angi 2026 cost guide), a well at the median depth of 156 ft runs about $3,900 to $10,100.

That is small next to local house prices: under 3% of the median home value of $392,900 (Census ACS 2020–2024).

With a typical water level of 65 ft, homes here use either a deep-well jet pump or a submersible, depending on yield. Price the pump separately from drilling.

Drilling over the decades in Hennepin County

1950s119 ft1960s127 ft1970s150 ft1980s157 ft1990s160 ft2000s170 ft2010s165 ft2020s168 ft

Wells completed since 2010 are somewhat deeper (median 167 ft) than those drilled before 1990 (145 ft). The 1980s were the busiest decade, with 4,097 new household wells on record.

Hennepin County next to its neighbours

Anoka County: median depth 137 ftCarver County: median depth 195 ftDakota County: median depth 260 ftRamsey County: median depth 140 ftScott County: median depth 220 ftSherburne County: median depth 90 ftWright County: median depth 110 ftHennepin County: median depth 156 ft<50 ft50-100 ft100-200 ft200-300 ft300-500 ft500+ ft
Hennepin County (orange outline) with 7 neighbouring counties; darker means deeper median wells.

Only 3 of 7 neighbouring counties with records have a deeper median well; nearby medians span from Sherburne County (90 ft) to Dakota County (260 ft).

CountyMedian depthWater levelYieldPeople on high-arsenic wells (est.)
Hennepin County156 ft65 ft30 gpm37
Dakota County260 ft95 ft20 gpm219
Scott County220 ft100 ft30 gpm881
Carver County195 ft110 ft35 gpm408
Ramsey County140 ft60 ft20 gpmnear 0
Anoka County137 ft20 ft35 gpm2,983
Wright County110 ft40 ft30 gpm1,877
Sherburne County90 ft22 ft30 gpm2,191

Neighbours: Census county adjacency 2024.

Buying a home with a well in Hennepin County

  • The median home here was built in 1973. Ask the seller for the well log, or look it up in Minnesota County Well Index (MGS/MDH), non-public-supply wells.
  • A well between 115 ft and 208 ft is normal for Hennepin County. Much shallower than 115 ft deserves a careful water test.
  • A flow test should be routine; county wells are productive, with a median of 30 gallons per minute.
  • Make sure the water test includes iron; 61% of sampled local wells were over its limit.

Help in Minnesota

For Hennepin County well owners: Minnesota Department of Health, Well Management Section, certified labs in Minnesota, free or low-cost testing, and all Minnesota well rules and data.

Questions about wells in Hennepin County

What is the average well depth in Hennepin County, Minnesota?

156 ft is the median across 20,400 household well records; the middle half are 115 ft to 208 ft.

Is well water safe to drink in Hennepin County?

Iron stands out in measured groundwater: 61% of 249 sampled wells were over the EPA SMCL.

What aquifer do wells in Hennepin County draw from?

About 58% of Hennepin County is over the Cambrian-Ordovician aquifer system (sandstone aquifers), with 42% over rock outside any principal aquifer. Your own well log names the formation your well actually taps.

How far down is the water in Hennepin County wells?

Driller logs put the median static water level at 65 ft below ground.

How much water does a Hennepin County well produce?

The median tested yield is 30 gallons per minute, high for the state.

Data for Hennepin County

20,400 household well records, dated from the 1950s to the 2020s, from Minnesota County Well Index (MGS/MDH), non-public-supply wells (source); homes and population from Census ACS 2020–2024. How we filter the records. Download Hennepin County as JSON (CC BY 4.0).

Questions about a well in Hennepin County?

Ask us about your situation. A real person reads every question.

This field is required.
We reply by email. We never share it without your permission.Enter an email address like name@example.com.
Describe what you are seeing and anything you have tried. Plain words are fine.Please write at least 20 characters so we can help.
Choose your state so we can point you to the right rules.
Prefer the full form?

Thanks, we have your question.

We read every message and reply by email, usually within a few working days. If it is urgent (sickness, a positive E. coli test, or a flooded well), use bottled water and call your county or state health department now.

Find your state's well program