How Marion County stands out in Oregon
- Wells are packed in: 1771 household well records per 100 square miles, 2nd densest in Oregon.
- A deep driller archive: 20,915 household well records, 5th most of 36 Oregon counties.
- One of the more populous counties we cover in Oregon, with about 349,244 residents (5th largest of 36).
- A low share of owner-occupied homes (62%), 5th lowest in our Oregon set.
Closest look-alike: Yamhill County next door. Compared with it, Marion County has higher yields (25 vs 15 gpm), homes 11 years older by median year built and wells about 43 ft shallower at the median.
Closest match further away: Wallowa County elsewhere in Oregon. Next to it, Marion County has more people estimated on high-arsenic wells (724 vs 79), homes 6 years newer by median year built and water standing 6 ft closer to the surface.
Iron is the one to test for in Marion County
Iron stands out in measured groundwater: 41% of 85 sampled wells were over the EPA SMCL.
| Substance | Wells tested | Over limit | Median | Limit used | Years |
|---|---|---|---|---|---|
| Arsenic | 90 | 13% | 2 µg/L | EPA MCL | 1991 to 2017 |
| Nitrate (as N) | 96 | 6% | 0.06 mg/L as N | EPA MCL | 1991 to 2017 |
| Uranium | 46 | 0% | 0.05 µg/L | EPA MCL | 1993 to 2017 |
| Manganese | 77 | 36% | 0.104 mg/L | EPA lifetime health advisory | 1991 to 2017 |
| Iron | 85 | 41% | 0.15 mg/L | EPA SMCL | 1991 to 2017 |
| Fluoride | 31 | 0% | 0.2 mg/L | EPA MCL | 1993 to 2002 |
| Lead | 48 | 0% | 0.335 µg/L | EPA action level | 1991 to 2017 |
| Radon | 10 | 0% | 425 pCi/L | EPA AMCL | 1993 to 1993 |
| Hardness | 76 | no data | 95.05 mg/L as CaCO3 | over 180 mg/L is very hard | 1991 to 2017 |
Latest result per well since 1990, Water Quality Portal; 559 results across 9 substances.
Arsenic estimate
About 724 people in Marion County (range 556 to 930) are estimated by USGS to be on household wells above the 10 µg/L arsenic limit, a middling figure for Oregon. That is more than in about 64% of Oregon counties. USGS model estimate.
What to test for in Marion County
- Coliform bacteria and nitrate once a year, the EPA baseline for any private well.
- Arsenic: USGS estimates about 724 people here drink from household wells above the 10 µg/L limit.
- Iron: 41% of sampled wells here were over the EPA SMCL.
- Manganese: 36% of sampled wells here were over the EPA lifetime health advisory.
Got results already? Check them with our result interpreter.
How deep wells go in Marion County
| Household well records | 20,915 |
|---|---|
| Median depth | 134 ft |
| Middle half of wells | 90 ft to 236 ft |
| Shallowest 10% / deepest 10% | under 57 ft / over 351 ft |
| Median static water level | 40 ft |
| Median tested yield | 25 gpm |
| Rank in Oregon (deepest = 1) | 23rd of 36 |
| Deeper than this share of US counties in our data | 43% |
Most wells with a recorded depth fall 100 to 300 ft (54%). Only 3% reach 500 ft or more.
Between the median water level and the median depth sit about 94 ft of water, roughly 138 gallons in a 6-inch casing.
Wells here are productive, with a median tested yield of 25 gallons per minute, more than in about 92% of Oregon counties.
New wells in Marion County are going deeper
New wells are going much deeper: those completed since 2010 have a median of 185 ft, against 116 ft before 1990. Drilling peaked early, in the 1970s, when 5,548 household wells were logged. Only 10% of dated records are from 2010 or later, so most wells in service are older.
Marion County next to its neighbours
5 of 6 neighbouring counties with records drill deeper. Medians nearby run from Linn County (100 ft) to Jefferson County (330 ft).
| County | Median depth | Water level | Yield | People on high-arsenic wells (est.) |
|---|---|---|---|---|
| Marion County | 134 ft | 40 ft | 25 gpm | 724 |
| Jefferson County | 330 ft | 216 ft | 20 gpm | 77 |
| Wasco County | 306 ft | 160 ft | 20 gpm | 187 |
| Yamhill County | 177 ft | 40 ft | 15 gpm | 894 |
| Clackamas County | 160 ft | 60 ft | 20 gpm | 1,375 |
| Polk County | 145 ft | 30 ft | 10 gpm | 545 |
| Linn County | 100 ft | 19 ft | 20 gpm | 1,172 |
Neighbours: Census county adjacency 2024.
Marion County and the Pacific Northwest basaltic-rock aquifers
About 59% of Marion County is over the Pacific Northwest basaltic-rock aquifers (igneous and metamorphic-rock aquifers), with 41% over the Willamette Lowland basin-fill aquifers. Among the 25 counties in our data that sit mainly over the same aquifer (across 5 states), Marion County's median well of 134 ft is near the middle: deeper than about 40% of them.
Uppermost principal aquifer: USGS Principal Aquifers map, sampled across the county on a grid. A well can draw from a deeper or local aquifer instead.
What drilling to 134 ft costs in Marion County
Using $25 to $65 per foot for drilling only (Angi 2026 cost guide), a well at the median depth of 134 ft runs about $3,400 to $8,700. At the 75th percentile (236 ft) it is $5,900 to $15,300.
That is small next to local house prices: under 2% of the median home value of $416,400 (Census ACS 2020–2024).
With a typical water level of 40 ft, homes here use either a deep-well jet pump or a submersible, depending on yield. Price the pump separately from drilling.
Buying a home with a well in Marion County
- The median home here was built in 1979. Ask the seller for the well log, or look it up in Well Reports (Water Well Log database), Oregon Water Resources Department.
- A well between 90 ft and 236 ft is normal for Marion County. Much shallower than 90 ft deserves a careful water test.
- A flow test should be routine; county wells are productive, with a median of 25 gallons per minute.
- Make sure the water test includes iron; 41% of sampled local wells were over its limit.
Help in Oregon
For Marion County well owners: Oregon Health Authority, Domestic Well Safety Program, certified labs in Oregon, and all Oregon well rules and data.
Questions about wells in Marion County
What is the average well depth in Marion County, Oregon?
The median is 134 ft across 20,915 records, but depths vary a lot: the middle half run from 90 ft to 236 ft.
Is well water safe to drink in Marion County?
Iron stands out in measured groundwater: 41% of 85 sampled wells were over the EPA SMCL. Arsenic is the main known risk, with about 724 people estimated on high-arsenic wells.
What aquifer do wells in Marion County draw from?
About 59% of Marion County is over the Pacific Northwest basaltic-rock aquifers (igneous and metamorphic-rock aquifers), with 41% over the Willamette Lowland basin-fill aquifers. Your own well log names the formation your well actually taps.
How much water does a Marion County well produce?
The median tested yield is 25 gallons per minute, high for the state.
Are wells getting deeper in Marion County?
New wells are going much deeper: those completed since 2010 have a median of 185 ft, against 116 ft before 1990.
Data for Marion County
20,915 household well records, dated from the 1950s to the 2020s, from Well Reports (Water Well Log database), Oregon Water Resources Department (source); homes and population from Census ACS 2020–2024. How we filter the records. Download Marion County as JSON (CC BY 4.0).
