Ask a question
100 ftmedian well depth33rd deepest of 39 in WA
9,062household well recordsState well records
38 ftmedian water levelDriller-reported
1,692people est. on high-arsenic wellsUSGS model
At a glanceThat rests on 9,062 household well records, a large sample. About 72% of Thurston County is over the Puget Sound aquifer system (unconsolidated sand and gravel aquifers), with 28% over rock outside any principal aquifer. In measured groundwater samples, iron was the most common problem, with 6% of 31 tested wells over the EPA SMCL. The median tested yield is 30 gallons per minute. About 299,067 people live in Thurston County, one of the larger counties by population. Its 1254 household well records per 100 square miles are among the densest in the state. It borders Grays Harbor, Lewis, Mason and Pierce counties. It lies in western Washington. Lakes, rivers and other water cover 7% of the county's area.

How Thurston County stands out in Washington

  • A deep driller archive: 9,062 household well records, 2nd most of 39 Washington counties.
  • One of the most uniform well-depth patterns in Washington: the middle half spans 73 ft to 153 ft.
  • Newer housing than most of Washington: the median home was built in 1991, the 4th newest of 39 counties.
  • Wells are packed in: 1254 household well records per 100 square miles, 4th densest in Washington.

Closest look-alike: Lewis County next door. Compared with it, Thurston County has higher yields (30 vs 18 gpm), homes 11 years newer by median year built and water standing 8 ft further down.

Closest match further away: Snohomish County elsewhere in Washington. Next to it, Thurston County has fewer people estimated on high-arsenic wells (1,692 vs 6,178), higher yields (30 vs 20 gpm) and median home values $215,700 lower.

Wells in Thurston County are shallower than most of Washington

groundmiddle half of wells: 73 ft–153 ftwater level 38 ftmedian well 100 ftdeepest 10% start at 257 ft
To scale: ground, the median water level at 38 ft and the median well bottom at 100 ft in Thurston County.
Household well records9,062
Median depth100 ft
Middle half of wells73 ft to 153 ft
Shallowest 10% / deepest 10%under 57 ft / over 257 ft
Median static water level38 ft
Median tested yield30 gpm
Rank in Washington (deepest = 1)33rd of 39
Deeper than this share of US counties in our data27%

The largest group of wells with a recorded depth fall under 100 ft (49%). Only 2% reach 500 ft or more.

Between the median water level and the median depth sit about 62 ft of water, roughly 91 gallons in a 6-inch casing.

The median tested yield is 30 gallons per minute.

Thurston County and the Puget Sound aquifer system

About 72% of Thurston County is over the Puget Sound aquifer system (unconsolidated sand and gravel aquifers), with 28% over rock outside any principal aquifer. Among the 8 counties in our data that sit mainly over the same aquifer, Thurston County's median well of 100 ft is shallower than most: deeper than about 12% of them.

Uppermost principal aquifer: USGS Principal Aquifers map, sampled across the county on a grid. A well can draw from a deeper or local aquifer instead.

Water quality in Thurston County

In measured groundwater samples, iron was the most common problem, with 6% of 31 tested wells over the EPA SMCL.

SubstanceWells testedOver limitMedianLimit usedYears
Nitrate (as N)546%2.305 mg/L as NEPA MCL1990 to 2025
Manganese313%0.0025 mg/LEPA lifetime health advisory1990 to 2017
Iron316%0.0091 mg/LEPA SMCL1990 to 2017
Fluoride190%0.05 mg/LEPA MCL1990 to 2017
Radon150%380 pCi/LEPA AMCL1996 to 1997
Hardness19no data55.9 mg/L as CaCO3over 180 mg/L is very hard1990 to 2017

Latest result per well since 1990, Water Quality Portal; 169 results across 6 substances.

Arsenic estimate

About 1,692 people in Thurston County (range 1,268 to 2,286) are estimated by USGS to be on household wells above the 10 µg/L arsenic limit, a middling figure for Washington. That is more than in about 74% of Washington counties. USGS model estimate.

What to test for in Thurston County

  • Coliform bacteria and nitrate once a year, the EPA baseline for any private well.
  • Arsenic: USGS estimates about 1,692 people here drink from household wells above the 10 µg/L limit.
  • Iron: 6% of sampled wells here were over the EPA SMCL.

Got results already? Check them with our result interpreter.

What drilling to 100 ft costs in Thurston County

Using $25 to $65 per foot for drilling only (Angi 2026 cost guide), a well at the median depth of 100 ft runs about $2,500 to $6,500. At the 75th percentile (153 ft) it is $3,800 to $9,900.

That is small next to local house prices: under 1% of the median home value of $480,300 (Census ACS 2020–2024).

With a typical water level of 38 ft, homes here use either a deep-well jet pump or a submersible, depending on yield. Price the pump separately from drilling.

Drilling over the decades in Thurston County

1990s88 ft2000s100 ft2010s117 ft2020s119 ft

Much of the drilling is recent: the busiest decade was the 2000s, with 3,980 household wells logged.

Buying a home with a well in Thurston County

  • The median home here was built in 1991. Ask the seller for the well log, or look it up in Well Construction Reports (Well Log Database), Washington Department of Ecology.
  • A well between 73 ft and 153 ft is normal for Thurston County. Much shallower than 73 ft deserves a careful water test.
  • A flow test should be routine; county wells are productive, with a median of 30 gallons per minute.
  • Make sure the water test includes iron; 6% of sampled local wells were over its limit.

Thurston County next to its neighbours

Grays Harbor County: median depth 91 ftLewis County: median depth 100 ftMason County: median depth 130 ftPierce County: median depth 128 ftThurston County: median depth 100 ft<50 ft50-100 ft100-200 ft200-300 ft300-500 ft500+ ft
Thurston County (orange outline) with 4 neighbouring counties; darker means deeper median wells.

2 of 4 neighbouring counties with records drill deeper. Medians nearby run from Grays Harbor County (91 ft) to Mason County (130 ft).

CountyMedian depthWater levelYieldPeople on high-arsenic wells (est.)
Thurston County100 ft38 ft30 gpm1,692
Mason County130 ft60 ft20 gpm327
Pierce County128 ft54 ft38 gpm1,738
Lewis County100 ft30 ft18 gpm1,825
Grays Harbor County91 ft21 ft18 gpm101

Neighbours: Census county adjacency 2024.

Help in Washington

For Thurston County well owners: Washington State Department of Health and Department of Ecology, certified labs in Washington, free or low-cost testing, and all Washington well rules and data.

Questions about wells in Thurston County

What is the average well depth in Thurston County, Washington?

100 ft is the median across 9,062 household well records; the middle half are 73 ft to 153 ft.

Are wells in Thurston County deeper than elsewhere in Washington?

No, they are shallower: Thurston County ranks deeper than about 15% of Washington counties in our data, and deeper than 27% of US counties we cover.

What aquifer do wells in Thurston County draw from?

About 72% of Thurston County is over the Puget Sound aquifer system (unconsolidated sand and gravel aquifers), with 28% over rock outside any principal aquifer. Your own well log names the formation your well actually taps.

Is well water safe to drink in Thurston County?

In measured groundwater samples, iron was the most common problem, with 6% of 31 tested wells over the EPA SMCL. Arsenic is the main known risk, with about 1,692 people estimated on high-arsenic wells.

How much water does a Thurston County well produce?

The median tested yield is 30 gallons per minute.

Data for Thurston County

9,062 household well records, dated from the 1990s to the 2020s, from Well Construction Reports (Well Log Database), Washington Department of Ecology (source); homes and population from Census ACS 2020–2024. How we filter the records. Download Thurston County as JSON (CC BY 4.0).

Questions about a well in Thurston County?

Ask us about your situation. A real person reads every question.

This field is required.
We reply by email. We never share it without your permission.Enter an email address like name@example.com.
Describe what you are seeing and anything you have tried. Plain words are fine.Please write at least 20 characters so we can help.
Choose your state so we can point you to the right rules.
Prefer the full form?

Thanks, we have your question.

We read every message and reply by email, usually within a few working days. If it is urgent (sickness, a positive E. coli test, or a flooded well), use bottled water and call your county or state health department now.

Find your state's well program