Ask a question
128 ftmedian well depth29th deepest of 39 in WA
8,276household well recordsState well records
38 gpmmedian tested yieldDriller-reported
1,738people est. on high-arsenic wellsUSGS model
At a glanceThat rests on 8,276 household well records, a large sample. The median tested yield is 38 gallons per minute. In measured groundwater samples, iron was the most common problem, with 10% of 171 tested wells over the EPA SMCL. About 49% of Pierce County is over the Puget Sound aquifer system (unconsolidated sand and gravel aquifers), with 47% over rock outside any principal aquifer. With about 930,319 residents, Pierce County is densely settled at roughly 558 people per square mile. It borders King, Kitsap, Lewis, Mason, Thurston and Yakima counties. It lies in western Washington. Lakes, rivers and other water cover 8% of the county's area.

How Pierce County stands out in Washington

  • One of the most uniform well-depth patterns in Washington: the middle half spans 94 ft to 189 ft.
  • One of the more populous counties we cover in Washington, with about 930,319 residents (2nd largest of 39).
  • A deep driller archive: 8,276 household well records, 6th most of 39 Washington counties.
  • Its deepest wells go less far than in most of Washington: the deepest 10% start at 265 ft, 7th shallowest of 39.

Closest look-alike: Mason County next door. Compared with it, Pierce County has more people estimated on high-arsenic wells (1,738 vs 327), higher yields (38 vs 20 gpm) and median home values $114,800 higher.

Closest match further away: Benton County elsewhere in Washington. Next to it, Pierce County has fewer people estimated on high-arsenic wells (1,738 vs 5,218), median home values $118,800 higher and wells about 34 ft shallower at the median.

Wells in Pierce County are shallower than most of Washington

groundmiddle half of wells: 94 ft–189 ftwater level 54 ftmedian well 128 ftdeepest 10% start at 265 ft
To scale: ground, the median water level at 54 ft and the median well bottom at 128 ft in Pierce County.
Household well records8,276
Median depth128 ft
Middle half of wells94 ft to 189 ft
Shallowest 10% / deepest 10%under 70 ft / over 265 ft
Median static water level54 ft
Median tested yield38 gpm
Rank in Washington (deepest = 1)29th of 39
Deeper than this share of US counties in our data40%

Most wells with a recorded depth fall 100 to 300 ft (60%). Only 1% reach 500 ft or more.

Between the median water level and the median depth sit about 74 ft of water, roughly 109 gallons in a 6-inch casing.

The median tested yield is 38 gallons per minute.

Water quality in Pierce County

In measured groundwater samples, iron was the most common problem, with 10% of 171 tested wells over the EPA SMCL.

SubstanceWells testedOver limitMedianLimit usedYears
Arsenic662%0.5 µg/LEPA MCL1996 to 2017
Nitrate (as N)1051%0.55 mg/L as NEPA MCL1994 to 2017
Uranium370%0.5 µg/LEPA MCL1997 to 2017
Manganese1596%0.00417 mg/LEPA lifetime health advisory1996 to 2017
Iron17110%0.01 mg/LEPA SMCL1996 to 2017
Fluoride1440%0.05 mg/LEPA MCL1996 to 2017
Lead820%0.5 µg/LEPA action level1996 to 2017
Radon260%450 pCi/LEPA AMCL1996 to 1997
Hardness161no data55.1 mg/L as CaCO3over 180 mg/L is very hard1996 to 2017

Latest result per well since 1990, Water Quality Portal; 951 results across 9 substances.

Arsenic estimate

About 1,738 people in Pierce County (range 1,366 to 2,232) are estimated by USGS to be on household wells above the 10 µg/L arsenic limit, a middling figure for Washington. That is more than in about 77% of Washington counties. USGS model estimate.

What to test for in Pierce County

  • Coliform bacteria and nitrate once a year, the EPA baseline for any private well.
  • Arsenic: USGS estimates about 1,738 people here drink from household wells above the 10 µg/L limit.
  • Iron: 10% of sampled wells here were over the EPA SMCL.
  • Manganese: 6% of sampled wells here were over the EPA lifetime health advisory.

Got results already? Check them with our result interpreter.

Pierce County and the Puget Sound aquifer system

About 49% of Pierce County is over the Puget Sound aquifer system (unconsolidated sand and gravel aquifers), with 47% over rock outside any principal aquifer. Among the 8 counties in our data that sit mainly over the same aquifer, Pierce County's median well of 128 ft is near the middle: deeper than about 38% of them.

Uppermost principal aquifer: USGS Principal Aquifers map, sampled across the county on a grid. A well can draw from a deeper or local aquifer instead.

What drilling to 128 ft costs in Pierce County

Using $25 to $65 per foot for drilling only (Angi 2026 cost guide), a well at the median depth of 128 ft runs about $3,200 to $8,300.

That is small next to local house prices: under 2% of the median home value of $526,600 (Census ACS 2020–2024).

With a typical water level of 54 ft, homes here use either a deep-well jet pump or a submersible, depending on yield. Price the pump separately from drilling.

Pierce County next to its neighbours

King County: median depth 142 ftKitsap County: median depth 146 ftLewis County: median depth 100 ftMason County: median depth 130 ftThurston County: median depth 100 ftYakima County: median depth 185 ftPierce County: median depth 128 ft<50 ft50-100 ft100-200 ft200-300 ft300-500 ft500+ ft
Pierce County (orange outline) with 6 neighbouring counties; darker means deeper median wells.

4 of 6 neighbouring counties with records drill deeper. Medians nearby run from Lewis County (100 ft) to Yakima County (185 ft).

CountyMedian depthWater levelYieldPeople on high-arsenic wells (est.)
Pierce County128 ft54 ft38 gpm1,738
Yakima County185 ft64 ft60 gpm6,940
Kitsap County146 ft57 ft17 gpm1,374
King County142 ft51 ft30 gpm1,031
Mason County130 ft60 ft20 gpm327
Lewis County100 ft30 ft18 gpm1,825
Thurston County100 ft38 ft30 gpm1,692

Neighbours: Census county adjacency 2024.

Drilling over the decades in Pierce County

1990s118 ft2000s133 ft2010s134 ft2020s137 ft

Much of the drilling is recent: the busiest decade was the 2000s, with 3,334 household wells logged.

Buying a home with a well in Pierce County

  • The median home here was built in 1986. Ask the seller for the well log, or look it up in Well Construction Reports (Well Log Database), Washington Department of Ecology.
  • A well between 94 ft and 189 ft is normal for Pierce County. Much shallower than 94 ft deserves a careful water test.
  • A flow test should be routine; county wells are productive, with a median of 38 gallons per minute.
  • Make sure the water test includes iron; 10% of sampled local wells were over its limit.

Help in Washington

For Pierce County well owners: Washington State Department of Health and Department of Ecology, certified labs in Washington, free or low-cost testing, and all Washington well rules and data.

Questions about wells in Pierce County

What is the average well depth in Pierce County, Washington?

128 ft is the median across 8,276 household well records; the middle half are 94 ft to 189 ft.

Is well water safe to drink in Pierce County?

In measured groundwater samples, iron was the most common problem, with 10% of 171 tested wells over the EPA SMCL. Arsenic is the main known risk, with about 1,738 people estimated on high-arsenic wells.

What aquifer do wells in Pierce County draw from?

About 49% of Pierce County is over the Puget Sound aquifer system (unconsolidated sand and gravel aquifers), with 47% over rock outside any principal aquifer. Your own well log names the formation your well actually taps.

How much water does a Pierce County well produce?

The median tested yield is 38 gallons per minute.

Are wells in Pierce County deeper than elsewhere in Washington?

No, they are shallower: Pierce County ranks deeper than about 26% of Washington counties in our data, and deeper than 40% of US counties we cover.

Data for Pierce County

8,276 household well records, dated from the 1990s to the 2020s, from Well Construction Reports (Well Log Database), Washington Department of Ecology (source); homes and population from Census ACS 2020–2024. How we filter the records. Download Pierce County as JSON (CC BY 4.0).

Questions about a well in Pierce County?

Ask us about your situation. A real person reads every question.

This field is required.
We reply by email. We never share it without your permission.Enter an email address like name@example.com.
Describe what you are seeing and anything you have tried. Plain words are fine.Please write at least 20 characters so we can help.
Choose your state so we can point you to the right rules.
Prefer the full form?

Thanks, we have your question.

We read every message and reply by email, usually within a few working days. If it is urgent (sickness, a positive E. coli test, or a flooded well), use bottled water and call your county or state health department now.

Find your state's well program